OpenVox UC120 IPPBX
Designed for SME and SOHO users;
Compact and lightweight;
Provides FXS, FXO, GSM/LTE and Φ3.5 audio interface;
Support up to 15 concurrent calls;
Features fast installation, easy deployment, and high reliability.
Request a Quote-
Specifications
OpenVox UC120 Series IPPBX is a new generation Unified Communication terminal equipment that combines voice and data. It is compact and lightweight, and provides following voice interfaces: FXS, FXO, GSM/LTE and Φ3.5 audio interface. It is compatible with multiple service platforms and terminals and can seamlessly connect to VoIP networks, traditional telephone networks (PSTN) and mobile networks (PLMN), and provide diverse converged communications solutions.
On the one hand, the UC120 connects to traditional telephones, faxes and traditional analog PBXs via a standard voice interface; on the other hand, it uses the standard SIP protocol and is compatible with most IPPBX, soft switch and SIP-based network platforms. At the same time, the UC120 supports four GSM bands to meet the requirements of global mobile communication networks.
As one of the product features, the product combines a Φ3.5 audio port, which can be directly connected to a computer headset for voice calls.
In addition, it has high-speed data capabilities, allowing users to high-speed Internet access via the WAN (LAN1) / LAN (LAN2) interface.
UC120 can be used as a personal communication product, and can also be used as a centralized communication product for SME, providing high-speed Internet access, enterprise voice communication, and enterprise short message transmission and reception.
Performance
- Convergence of telephone calls, recordings, messages and instant messages
- Plug and Play IP Phone;
- Corporate headquarters and branch voice networking
- Commercial communication between mobile phone and extension anytime, anywhere
- Open Application Programming Interface(API)
- Compatible with IMS and Asterisk service platforms
Software & Platform:
- Linux OS
UC120 Series IPPBX Product Model UC120-1S1O1G UC120-1S1O1L UC120-2S1G UC120-2O1G UC120-2S1L UC120-2O1L FXO 1 1 N 2 N 2 FXS 1 1 2 N 2 N GSM 1 N 1 1 N N LTE* N 1 N N 1 1 SIP Register license 30 SIP Concurrency (G.711A/U) 15 SIP Concurrency (G.729) 5 Audio Interface (Pair) 1 Weight 0.5kg Power Supply 12VDC， ≥1.5A Maximum power consumption 12W Dimension（W/D/H） 160X105X24 mm WAN（LAN1 Port） 10/100 Base-T RJ45 LAN（LAN2 Port） 10/100 Base-T RJ45 SIM Card Slot 1 Micro SD Card Slot 1 Operation Temperature 0℃ ~ 45℃ Operation Humidity 10% ~ 90% Non-condensing Non-condensing -20℃ ~ 80℃ *LTE is still in development;
*N: Not Supported;
*UC120-1S1O Series take Line1 as FXS port and Line2 as FXO port by default, and support hardware failover. -
Features
Physical Specification
- FXS 1
- FXO: 1
- GSM/LTE: 1
- Network Interface: 2 10/100 Base-T RJ45
Voice Feature
- VoIP Protocols: SIP over UDP/TCP/TLS, SDP, RTP/SRTP PPTP VPN
- Supported Codecs: G.711a/μ law, G.723.1, G.729A/B, GSM,G.726, G.722, SPEEX, ADPCM, iLBC
- Silence Suppression
- Comfort Noise Generator (CNG)
- Voice Activity Detection (VAD)
- Echo canceller(G.168), Maximum 128ms
- Adaptive Dynamic Buffering
- Adjustable Gain Control
- Automatic Gain Control
- Call Proceeding Tone: Dial Tone, Ring-back Tone, Busy Tone
- Support NAT Traversal
- DTMF Mode: RFC2833/Signal/Inband
- VPN clients：PPTP/OpenVPN/Zerotier/L2TP/N2N（Not available for EAEU）
Mobile Feature
- GSM: 850/900/1800/1900MHz
- LTE: LTE FDD: B1/B3/B5/B8LTE TDD: B38/B38/B40/B41
- SIM/UIM: each channel supports 1 SIM/UIM
- SIM Card Voltage:1.8V, 3.0V
- Antenna:3.0dB, SMA interface
Additional Service
- Call Forwarding (Unconditional/No Reply/Busy/Not Reachable)
- Call Waiting/Holding
- Call Transfer
- Intra-group Pickup
- Hotline
- Do Not Disturb (DND)
- Tripartite Meeting
FXS
- Interface Type:RJ11
- Caller ID Signaling: BELL， V23, V23_JP, DTMF
- Hang Up Detection: Off-hook, On-hook, Busy Tone
- Polarity Reverse
- Hooking Detection
FXO
- Interface Type:RJ11
- Caller ID Detection: FSK, DTMF
- Reversed-Polarity Detection
- Delayed Response Off-hook
- Busy Tone Detection
- No Current Hang-up Detection
Software Feature
- Interface Type: RJ11
- Ring Group
- Routes Group
- Calling/Called Number Transform
- Time Condition
- Based on Destination Routing
- Based on Source Routing
- Dial Plan
- Failover Routing
- FXO Impedance Matching
- Customizable Mult-language IVR
- Auto Attendant Function
- Local CDR Storage
Management & Maintenance
- Simple and convenient configuration via Web GUI
- CLI Management Config
- Support configuration flies backup and upload
- Support Chinese and English page
- Firmware Update by HTTP/TFTP
- Modify Password via Web & Telnet
- CDR Query & Export
- Syslog Query & Export
- Ping and Tracer Test
- Traffic Statistics: TCP, UDP, RTP
- Network Capture/Network Quality Test
- Automatic Time synchronization
-
Download
PDF Manual