×
Notice
The forum is in read only mode.
Forum
Telephony Cards Support
A400/800/1200 Series
Echo Problems
×
Questions about A400/800/1200 Analog Interface Card
Echo Problems
14 years 10 months ago #3309
by danndp
Hello my friends...
I am having some problems with echo in the beginning of the call, when a call comes from PSTN i usually hear some echo in the first 5 seconds, then it gets rigth, can you help me to solve this problem? what should i check?
Regards
DD
Less
More
Posts: 4
Thank you received: 1
14 years 10 months ago #3310
by Denins.Den
I think your should change your zapata.conf like this:
echocancel=yes
;echocancelwhenbridged=yes
;echotraining=yes
;echotraining=800
14 years 10 months ago #3362
by danndp
My friend
I have a terrible echo problems, even with the changes you told me to do....can you help us please...
iRegards
DD
Less
More
Posts: 4
Thank you received: 1
14 years 10 months ago #3363
by Denins.Den
you should change zaptel.conf like:
loadzone=(your country code)
defaultzone=(your country code)
and asterisk/indications.conf should like:
country=(your country code)
regards!
denins.den
12 years 5 months ago #7526
by agidi
What does the zone and country tags do on the card?I still have echo problems
Im loosing my hair, and there's not much left to loose :'(
12 years 4 months ago #7679
by chunkbass
I agree with Dennins .:loveliness:
Forum
Telephony Cards Support
A400/800/1200 Series
Echo Problems
Time to create page: 0.041 seconds