Caller ID Setting

Hello,
The alternatives of caller ID signalling are: bell, v23, dtmf , smdi.
And the singals of starting caller ID are: ring, polarity, polarity_IN(for India)

If you are not sure which one should be selected, you have to ask your service provider to confirm it firstly.

Hello,

Here is the Avaya PABX Engineer's info :
1. Caller ID can be set DTMF or FSK at Analog extension, at IP Phone
the default is FSK but can be set DTMF too, it can configure at each IP extension
2. Polarity reversal is NO for IP Telephone, it can be set at Analog,
depend on ICAT

Hello,
what about the starting signal of Caller ID :ring.?
If you don't have polarity reversal feature, the parameter of cidstart won't take effect.
Try to set its value to ring.

Hello,

Today My Ericsson Vendor already activate the Caller ID, and it is appear at analog phone, He said the configuration is DTMF and POLARITY. Incoming and Outgoing Call using GSM line.

I already try this configuration, but the CID is not appear yet:
Caller signaling = dtmf, bell, v23, smdi
CID start=polarity, ring, polarity_IN

Here is the log:
== Begin MixMonitor Recording Zap/1-1
dialparties.agi: Starting New Dialparties.agi
== Parsing '/etc/asterisk/manager.conf': Found
== Parsing '/etc/asterisk/manager_additional.conf': Found
== Parsing '/etc/asterisk/manager_custom.conf': Found
== Manager 'admin' logged on from 127.0.0.1
dialparties.agi: Caller ID name is 'unknown' number is 'unknown'
dialparties.agi: Methodology of ring is 'none'
-- dialparties.agi: Added extension 101 to extension map
-- dialparties.agi: Extension 101 cf is disabled
-- dialparties.agi: Extension 101 do not disturb is disabled
-- dialparties.agi: DbDel CALLTRACE/101 - Caller ID is not defined
-- dialparties.agi: Filtered ARG3: 101
== Manager 'admin' logged off from 127.0.0.1
-- AGI Script dialparties.agi completed, returning 0
[May 7 01:36:59] DEBUG[2719]: app_macro.c:337 _macro_exec: Executed application: AGI
-- Executing [s@macro-dial:7] Dial("Zap/1-1", "SIP/101||tr") in new stack
-- Called 101
-- SIP/101-09078bf0 is ringing
== Spawn extension (macro-dial, s, 7) exited non-zero on 'Zap/1-1' in macro 'dial'
== Spawn extension (macro-dial, s, 7) exited non-zero on 'Zap/1-1' in macro 'exten-vm'
== Spawn extension (macro-dial, s, 7) exited non-zero on 'Zap/1-1'
-- Executing [h@macro-dial:1] Macro("Zap/1-1", "hangupcall") in new stack
-- Executing [s@macro-hangupcall:1] ResetCDR("Zap/1-1", "w") in new stack
[May 7 01:37:18] DEBUG[2719]: app_macro.c:337 _macro_exec: Executed application: ResetCDR
-- Executing [s@macro-hangupcall:2] NoCDR("Zap/1-1", "") in new stack
[May 7 01:37:18] DEBUG[2719]: app_macro.c:337 _macro_exec: Executed application: NoCDR
-- Executing [s@macro-hangupcall:3] GotoIf("Zap/1-1", "1?skiprg") in new stack
-- Goto (macro-hangupcall,s,6)
[May 7 01:37:18] DEBUG[2719]: app_macro.c:337 _macro_exec: Executed application: GotoIf
-- Executing [s@macro-hangupcall:6] GotoIf("Zap/1-1", "1?skipblkvm") in new stack
-- Goto (macro-hangupcall,s,9)
[May 7 01:37:18] DEBUG[2719]: app_macro.c:337 _macro_exec: Executed application: GotoIf
-- Executing [s@macro-hangupcall:9] GotoIf("Zap/1-1", "1?theend") in new stack
-- Goto (macro-hangupcall,s,11)
[May 7 01:37:18] DEBUG[2719]: app_macro.c:337 _macro_exec: Executed application: GotoIf
-- Executing [s@macro-hangupcall:11] Hangup("Zap/1-1", "") in new stack
== Spawn extension (macro-hangupcall, s, 11) exited non-zero on 'Zap/1-1' in macro 'hangupcall'
== Spawn extension (macro-hangupcall, s, 11) exited non-zero on 'Zap/1-1'
== End MixMonitor Recording Zap/1-1
-- Hungup 'Zap/1-1'

Please help..

Sam

i] Last edited by samsalim at 2010-5-7 14:41 [/i

Hi:
please refer this link: http://bbs.openvox.cn/viewthread.php?tid=831&extra=page%3D2

hi:
please record the callerid using: ztmonitor, and post there.