Working G400P and A400P on a single machine

This should be a configuration/installation issue.

Can you give me remote access of your system now? Let me have detail check now.

PM sent

let me know. Thanks

Hi;

I tried using a different Distro
CentOS 5.3
Asterisk 1.8.3.3
Dahdi-linux-complete 2.5.0.1

drivers seems to be woking.
'Dahdi' command is already showing on asterisk CLI
as well as 'gsm' command on asterisk CLI
'dahdi show channels' do not give any output
I can't seem to have the FXS working. It do not give a dial tone.
plugging a PSTN on FXO gives no output on asterisk CLI (verbose set to 9)


*power on A400P is connected

any idea on this?

thanks


i] Last edited by rennelinfinitys at 2012-9-27 09:29 [/i

hi,
You should insert "#include dahdi-channels.conf" to end of file /etc/asterisk/chan_dahdi.conf to solve the problem that the system didn't show channels on the console. After that, remember to "reload " .

I've already added the line but still the same..

Stop Asterisk first, and then remove both driver modules opvxg4xx and wctdm by
modprobe -r opvxg4xx
modprobe -r wctdm

now, modprobe wctdm->modprobe opvxg4xx debug=8 ->dahdi_genconf->dahdi_cfg -vvv
Starting Asterisk by `asterisk -vvvcg`, type `dahdi show channels` and `gsm show spans` to check their channels and status.