× Questions about UC300/UC500 IP Phone System

Custumizing outbound CallerID on UC300

1 month 1 week ago #12961 by pavel_s
Hello!
How to configure adding of the fixed prefix to the extension number by outbound calls?
For example, my extension have numbering 201, 202, 203, etc.
The Provider demands 6-unit number: 567201, 567202, etc.
What option configures it?
Thanks.
1 month 1 week ago #12962 by chunlei.yi
You can match the "match pattern" and "callerID" options in the Outbound Routes.
if still have problem, you can contact me on skype.
1 month 1 week ago #12963 by chunlei.yi
skype ID: chunlei.yi
1 month 1 week ago - 1 month 1 week ago #12965 by pavel_s
The "Match pattern" field applies a filter to the called number (not the calling).
The "CallerID" field in the "Dial Pattern" section applies a filter to the calling number, but does not modify it.
The question is how to modify the calling number.

This can be done through the menu "Extension / Features / Outbound CID",
but, unfortunately, this setting will have to be performed for each extension in the PBX separately.
1 month 1 week ago #12967 by chunlei.yi
You can config the Route CID then override Extension CID in the Outbound Routes option
1 month 1 week ago - 1 month 1 week ago #12971 by pavel_s
OK, how to specify a pattern in the field "Route CID", but not a fixed number (not "567202" but "567<Extension>")?
There is also a "PBX / Tnunks / Advanced / Outbound CallerID" field, it is efficient, but you need to know the formats of these fields in order to specify a value with variables.
Time to create page: 0.028 seconds
Powered by Kunena Forum