I have A400P 2 FXS + 2 FXO run on trixbox CE v.2.6.2.3, my configuration is like this we have 2 PSTN line we use one for incoming one for out going, Channel 1 PSTN incoming line, Channel 2 Outgoing line, Channel 3 to Analog Phone, Channel 4 to Analog Phone, when we receive the call from outside to the following Analog Extension after the hang-up lines hang-up, but when no answer and the call forward to the follow me external number it use Channel 2 to dial out, after the call even both side hang up the phone both line still active and give busy signal to incoming call, until we have to reset the trixbox, line start working again, anyone has the situation like this,
Hi Miaolin
Yes " this issue only occur when the call was routed out from 2nd port "
I did change that to Elastix I have the same problem both lines off the hook I can not call out or nobody can call in, it is busy on both line, on Elastix I have to do Hardware Detection to hang up the lines, I think something wrong with the A400P22 card ! or what else I can do please let me know, I have customer interest with the system but I can not able to show it to them. !
I think it should not be the card issue, simplest way is try to use SIP call to run same process and see if it can be hangup or not.
to change asterisk version, you better download and re-compile asterisk yourself, not simply use elastix to replace trixbox or other system.
another question, if you use a simple extension to pick up and playback a big voice file, at this time, caller hangup will cause system detect and hangup the call?