fxo busy

Hi i have a pci card of a1200p with elastix 1.5
Seems to be a problem, i have a busy fxo module, but i don't have anything connect at all fxo and fxs modules.

What happened?
Here's a screenshoot, i hope will help too.



Regards
Nightduke

Hello,
What is your zapata.conf/chan_dahdi.conf under directory /etc/asterisk? Have you enabled the parameters busydetect and busycount ? Please post this file here! It seems to a setting issue.

lsdahdi
### Span 1: OPVXA1200/12 "OpenVox A1200P/A800P Board 13" (MASTER)
1 FXO FXSKS (In use) (EC: OSLEC)
2 FXO FXSKS (In use) (EC: OSLEC)
3 FXO FXSKS (In use) (EC: OSLEC)
4 FXO FXSKS (In use) (EC: OSLEC) RED
5 FXS FXOKS (In use) (EC: OSLEC)
6 FXS FXOKS (In use) (EC: OSLEC)
7 FXS FXOKS (In use) (EC: OSLEC)
8 FXS FXOKS (In use) (EC: OSLEC)
9 EMPTY
10 EMPTY
11 EMPTY
12 EMPTY

zapata.conf

;# Flash Operator Panel will parse this file for zap trunk buttons
;# AMPLABEL will be used for the display labels on the buttons

;# %c Zap Channel number
;# %n Line number
;# %N Line number, but restart counter
;# Example:
;# ;AMPLABEL:Channel %c - Button %n

;# For Zap/* buttons use the following
;# (where x=number of buttons to dislpay)
;# ;AMPWILDCARDLABEL(x):MyLabel


[channels]
language=es

; include zap extensions defined in AMP
#include zapata_additional.conf

; XTDM20B Port #1,2 plugged into PSTN
;AMPLABEL:Channel %c - Button %n
context=from-pstn
signalling=fxs_ks
faxdetect=incoming
usecallerid=yes
echocancel=yes
echocancelwhenbridged=no
echotraining=800
group=0
channel=1-2
fxsks=5-8

what else i must do? thanks

I think this is a error in zapata.conf:
fxsks=5-8

it should be signalling=fxsks

please refer this link:
http://wiki.openvox.cn/index.php/OpenVox_A1200P_Dahdi_en