A400P+trixbox - can't detect hangup & no callerid

[align=left]Hi,
I have installed A400P (1xFXO port) with trixbox 2.8.

I am facing the following problems:
1. Asterisk doesn't seem to pick up the hangup signal.
When I call from PSTN, when I hangup, Asterisk continue to think the call is still active and went on to voice mail recording.
Maybe Asterisk takes too long to detect the hangup signal. Is there any setting to do?

2. I can't detect caller ID in Asterisk. I have confirmed that I have caller id from my service provider.
Are there any settings I need to do to enable caller id?

Thanks
[/align]

Hello,
Firstly, you have to set the country format to the right status.And enable the parameters busydetect=yes and busycount=3 or higher value.Please refer this link for more details:
http://www.asteriskguru.com/tutorials/resolving_hangup_detection_problems_fxo_tdm_voicemail.html
For the CallerID.This issue also relates to your country format. Here is a simple method,maybe it is useful for you.
A.Stop asterisk.
B.Unload the driver dahdi
C.Load the driver dahdi with these commands:
1. modprobe dahdi
2.modprobe wctdm opermode=your country debug=1
3.dahdi_cfg -vvvvvvv.
D.Enable the parameter debug in logger.conf under directory /etc/asterisk/logger.conf.
E.Start asteirsk,
F.Make some test calls

Let me know the result after your testing.

Hi Joe,
To enable usydetect=yes and busycount=3, is this done in /etc/aserisk/chan_dahdi.conf?


Thanks

Hello,
Yes,if they don't exist there,you have to add them by yourself.