Ok I been following the troubleshoot in Q61.
1. IRQ seems to be handled properly just sharing with USB UHCI Device.
2. Dahdi_test gives me low results...
3. Do not have X windows running
4. I am using sata so no problems with IDE.
5. The command says at the end #wcfxo is just for the xctdm or opvxa1200 as well? anyway I done it...
6. Exec the latency timer setting but changing for my device info.
Hi jsjc:
if still has noise, please check you country format
set loadzone=your country defaultzone= your country in /etc/dahdi/system.conf
set country=your country in /etc/asterisk/indications.conf
then ran the command: modprobe opvxa1200 opermode=YOUR COUNTRY
Please have a try. Any problem,let me known...
Ok I been following the troubleshoot in Q61.
1. IRQ seems to be handled properly just sharing with USB UHCI Device.
2. Dahdi_test gives me low results... // what you mean by that? give the values?
3. Do not have X windows running
4. I am using ...
please check the terminals and some interrupt device if there is around the machine.