Unable to send Outbound Fax

Hello,
I am unable to send outbound faxes (Even no incoming) using Elastix+OpenVox A400P04+4 FXO Modules. I can send faxes between my IAX2 extensions, but no luck in sending fax through FXO PSTN lines. Please help as I am tired with dozens of installation tests and googling hundreds of sites.

You may connect using Team Viewer to my PC. I can establish a SSH connection my PC to Elastix Box.

Thanks, Jaleel

Hi,
FAX in asterisk you can refer this link: http://www.voip-info.org/wiki/view/Asterisk+fax

Thanks for your reply,

I did referred this site already, I am able to send fax from one IAX extension to another IAX extension. No issue with hylafax & IAX.
But I think there is a problem some where in the trunk or outgoing trunk. Fax is not routing from IAX to OpenVox FXO ports.

Jaleel

Hi,
Maybe this can help you: http://www.elastix.org/en/wiki.html

Dear [font=Helvetica, Arial, sans-serif]lisa.gao,[/font]
[font=Helvetica, Arial, sans-serif]
[/font]
[font=Helvetica, Arial, sans-serif]I respect your reply, but I did checked this one already. For your information - I have a good experience with hylafax and analog faxboards. This is my first time with IP telephony, and OpenVox cards. My problem is that, I could not lik OpenVox with IAX2 routing. I would request you to assist me by seeing my configuration remotely.[/font]


[font=Helvetica, Arial, sans-serif]Below are what steps I did already as per mentioned in "Install%20Elastix_1.6.0_OpenVox_A400p_En.pdf"[/font]
1. Installed Elastix 1.6
2. Checked on Replace file chan_dahdi.conf and clicked Detect New Hardware button
3. I could see WCTDM/4 "Wildcard TDM400P REV.." 1 FXO - 4 FXO
4. [root@elastix ~]# dahdi_genconf
5. [root@elastix ~]# dahdi_cfg -vv
6. Reboot system
7. Created 2 IAX2 Extension (Ext 101 and 102)
8. Kept default Trunk ZAP/g0 as it is
9. Kept default "09_outside" route as it is.
10. I can send fax between extension 101 and 102
11. Outgoing fax is not working. I get "Busy Signal Detected" in hylafax log.

Could you please connect to my elastix box remotely