Call drop

Hi,
I've installed Openvox A800P with Elastix 2.0.4.

Everything works as expected, except that sometimes the line suddenly drops.

Can somebody help me?

Here is a CLI output of a drop call:

-- Started music on hold, class 'default', on DAHDI/4-1
-- SIP/20-0000011c is ringing
-- SIP/22-0000011d is ringing
-- SIP/23-0000011e is ringing
-- SIP/22-0000011d answered DAHDI/4-1
-- Executing [s@macro-auto-blkvm:1] Set("SIP/22-0000011d", "__MACRO_RESULT=") in new stack
-- Executing [s@macro-auto-blkvm:2] NoOp("SIP/22-0000011d", "Deleting: BLKVM/600/DAHDI/4-1 TRUE") in new stack
-- Stopped music on hold on DAHDI/4-1
-- Remote UNIX connection
-- Remote UNIX connection disconnected
-- Executing [h@macro-dial:1] Macro("DAHDI/4-1", "hangupcall") in new stack
-- Executing [s@macro-hangupcall:1] GotoIf("DAHDI/4-1", "1?noautomon") in new stack
-- Goto (macro-hangupcall,s,3)
-- Executing [s@macro-hangupcall:3] NoOp("DAHDI/4-1", "TOUCH_MONITOR_OUTPUT=") in new stack
-- Executing [s@macro-hangupcall:4] GotoIf("DAHDI/4-1", "1?skiprg") in new stack
-- Goto (macro-hangupcall,s,7)
-- Executing [s@macro-hangupcall:7] GotoIf("DAHDI/4-1", "0?skipblkvm") in new stack
-- Executing [s@macro-hangupcall:8] NoOp("DAHDI/4-1", "Cleaning Up Block VM Flag: BLKVM/600/DAHDI/4-1") in new stack
-- Executing [s@macro-hangupcall:9] NoOp("DAHDI/4-1", "Deleting: BLKVM/600/DAHDI/4-1 ") in new stack
-- Executing [s@macro-hangupcall:10] GotoIf("DAHDI/4-1", "1?theend") in new stack
-- Goto (macro-hangupcall,s,12)
-- Executing [s@macro-hangupcall:12] Hangup("DAHDI/4-1", "") in new stack
== Spawn extension (macro-hangupcall, s, 12) exited non-zero on 'DAHDI/4-1' in macro 'hangupcall'
== Spawn extension (macro-dial, s, 7) exited non-zero on 'DAHDI/4-1' in macro 'dial'
== Spawn extension (ext-group, 600, 14) exited non-zero on 'DAHDI/4-1'
-- Hungup 'DAHDI/4-1'


Here is my log (another call):

[Feb 15 15:18:17] VERBOSE[2780] netsock.c: == Using SIP RTP TOS bits 184
[Feb 15 15:18:17] VERBOSE[2780] netsock.c: == Using SIP RTP CoS mark 5
[Feb 15 15:18:17] VERBOSE[3914] pbx.c: -- Executing [00********@from-internal:1] Macro("SIP/26-00000096", "user-callerid,SKIPTTL,") in new stack
[Feb 15 15:18:17] VERBOSE[3914] pbx.c: -- Executing [s@macro-user-callerid:1] Set("SIP/26-00000096", "AMPUSER=26") in new stack
[Feb 15 15:18:17] VERBOSE[3914] pbx.c: -- Executing [s@macro-user-callerid:2] GotoIf("SIP/26-00000096", "0?report") in new stack
[Feb 15 15:18:17] VERBOSE[3914] pbx.c: -- Executing [s@macro-user-callerid:3] ExecIf("SIP/26-00000096", "1?Set(REALCALLERIDNUM=26)") in new stack
[Feb 15 15:18:17] VERBOSE[3914] pbx.c: -- Executing [s@macro-user-callerid:4] Set("SIP/26-00000096", "AMPUSER=26") in new stack
[Feb 15 15:18:17] VERBOSE[3914] pbx.c: -- Executing [s@macro-user-callerid:5] Set("SIP/26-00000096", "AMPUSERCIDNAME=tlmktg") in new stack
[Feb 15 15:18:17] VERBOSE[3914] pbx.c: -- Executing [s@macro-user-callerid:6] GotoIf("SIP/26-00000096", "0?report") in new stack
[Feb 15 15:18:17] VERBOSE[3914] pbx.c: -- Executing [s@macro-user-callerid:7] Set("SIP/26-00000096", "AMPUSERCID=26") in new stack
[Feb 15 15:18:17] VERBOSE[3914] pbx.c: -- Executing [s@macro-user-callerid:8] Set("SIP/26-00000096", "CALLERID(all)="tlmktg" <26>") in new stack
[Feb 15 15:18:17] VERBOSE[3914] pbx.c: -- Executing [s@macro-user-callerid:9] ExecIf("SIP/26-00000096", "1?Set(CHANNEL(language)=it)") in new stack
[Feb 15 15:18:17] VERBOSE[3914] pbx.c: -- Executing [s@macro-user-callerid:10] GotoIf("SIP/26-00000096", "1?continue") in new stack
[Feb 15 15:18:17] VERBOSE[3914] pbx.c: -- Goto (macro-user-callerid,s,19)
[Feb 15 15:18:17] VERBOSE[3914] pbx.c: -- Executing [s@macro-user-callerid:19] NoOp("SIP/26-00000096", "Using CallerID "tlmktg" <26>") in new stack
[Feb 15 15:18:17] VERBOSE[3914] pbx.c: -- Executing [00********@from-internal:2] Set("SIP/26-00000096", "_NODEST=") in new stack
[Feb 15 15:18:17] VERBOSE[3914] pbx.c: -- Executing [00********@from-internal:3] Macro("SIP/26-00000096", "record-enable,26,OUT,") in new stack
[Feb 15 15:18:17] VERBOSE[3914] pbx.c: -- Executing [s@macro-record-enable:1] GotoIf("SIP/26-00000096", "1?check") in new stack
[Feb 15 15:18:17] VERBOSE[3914] pbx.c: -- Goto (macro-record-enable,s,4)
[Feb 15 15:18:17] VERBOSE[3914] pbx.c: -- Executing [s@macro-record-enable:4] ExecIf("SIP/26-00000096", "0?MacroExit()") in new stack
[Feb 15 15:18:17] VERBOSE[3914] pbx.c: -- Executing [s@macro-record-enable:5] GotoIf("SIP/26-00000096", "0?Group:OUT") in new stack
[Feb 15 15:18:17] VERBOSE[3914] pbx.c: -- Goto (macro-record-enable,s,15)
[Feb 15 15:18:17] VERBOSE[3914] pbx.c: -- Executing [s@macro-record-enable:15] GotoIf("SIP/26-00000096", "0?IN") in new stack
[Feb 15 15:18:17] VERBOSE[3914] pbx.c: -- Executing [s@macro-record-enable:16] ExecIf("SIP/26-00000096", "1?MacroExit()") in new stack
[Feb 15 15:18:17] VERBOSE[3914] pbx.c: -- Executing [00********@from-internal:4] Macro("SIP/26-00000096", "dialout-trunk,2,0********,,") in new stack
[Feb 15 15:18:17] VERBOSE[3914] pbx.c: -- Executing [s@macro-dialout-trunk:1] Set("SIP/26-00000096", "DIAL_TRUNK=2") in new stack
[Feb 15 15:18:17] VERBOSE[3914] pbx.c: -- Executing [s@macro-dialout-trunk:2] GosubIf("SIP/26-00000096", "0?sub-pincheck,s,1") in new stack
[Feb 15 15:18:17] VERBOSE[3914] pbx.c: -- Executing [s@macro-dialout-trunk:3] GotoIf("SIP/26-00000096", "0?disabletrunk,1") in new stack
[Feb 15 15:18:17] VERBOSE[3914] pbx.c: -- Executing [s@macro-dialout-trunk:4] Set("SIP/26-00000096", "DIAL_NUMBER=0********") in new stack
[Feb 15 15:18:17] VERBOSE[3914] pbx.c: -- Executing [s@macro-dialout-trunk:5] Set("SIP/26-00000096", "DIAL_TRUNK_OPTIONS=tr") in new stack
[Feb 15 15:18:17] VERBOSE[3914] pbx.c: -- Executing [s@macro-dialout-trunk:6] Set("SIP/26-00000096", "OUTBOUND_GROUP=OUT_2") in new stack
[Feb 15 15:18:17] VERBOSE[3914] pbx.c: -- Executing [s@macro-dialout-trunk:7] GotoIf("SIP/26-00000096", "0?nomax") in new stack
[Feb 15 15:18:17] VERBOSE[3914] pbx.c: -- Executing [s@macro-dialout-trunk:8] GotoIf("SIP/26-00000096", "0?chanfull") in new stack
[Feb 15 15:18:17] VERBOSE[3914] pbx.c: -- Executing [s@macro-dialout-trunk:9] GotoIf("SIP/26-00000096", "0?skipoutcid") in new stack
[Feb 15 15:18:17] VERBOSE[3914] pbx.c: -- Executing [s@macro-dialout-trunk:10] Set("SIP/26-00000096", "DIAL_TRUNK_OPTIONS=") in new stack
[Feb 15 15:18:17] VERBOSE[3914] pbx.c: -- Executing [s@macro-dialout-trunk:11] Macro("SIP/26-00000096", "outbound-callerid,2") in new stack
[Feb 15 15:18:17] VERBOSE[3914] pbx.c: -- Executing [s@macro-outbound-callerid:1] ExecIf("SIP/26-00000096", "0?Set(CALLERPRES()=)") in new stack
[Feb 15 15:18:17] VERBOSE[3914] pbx.c: -- Executing [s@macro-outbound-callerid:2] ExecIf("SIP/26-00000096", "0?Set(REALCALLERIDNUM=26)") in new stack
[Feb 15 15:18:17] VERBOSE[3914] pbx.c: -- Executing [s@macro-outbound-callerid:3] GotoIf("SIP/26-00000096", "1?normcid") in new stack
[Feb 15 15:18:17] VERBOSE[3914] pbx.c: -- Goto (macro-outbound-callerid,s,6)
[Feb 15 15:18:17] VERBOSE[3914] pbx.c: -- Executing [s@macro-outbound-callerid:6] Set("SIP/26-00000096", "USEROUTCID=") in new stack
[Feb 15 15:18:17] VERBOSE[3914] pbx.c: -- Executing [s@macro-outbound-callerid:7] Set("SIP/26-00000096", "EMERGENCYCID=") in new stack
[Feb 15 15:18:17] VERBOSE[3914] pbx.c: -- Executing [s@macro-outbound-callerid:8] Set("SIP/26-00000096", "TRUNKOUTCID=") in new stack
[Feb 15 15:18:17] VERBOSE[3914] pbx.c: -- Executing [s@macro-outbound-callerid:9] GotoIf("SIP/26-00000096", "1?trunkcid") in new stack
[Feb 15 15:18:17] VERBOSE[3914] pbx.c: -- Goto (macro-outbound-callerid,s,12)
[Feb 15 15:18:17] VERBOSE[3914] pbx.c: -- Executing [s@macro-outbound-callerid:12] ExecIf("SIP/26-00000096", "0?Set(CALLERID(all)=)") in new stack
[Feb 15 15:18:17] VERBOSE[3914] pbx.c: -- Executing [s@macro-outbound-callerid:13] ExecIf("SIP/26-00000096", "0?Set(CALLERID(all)=)") in new stack
[Feb 15 15:18:17] VERBOSE[3914] pbx.c: -- Executing [s@macro-outbound-callerid:14] ExecIf("SIP/26-00000096", "0?Set(CALLERID(all)=)") in new stack
[Feb 15 15:18:17] VERBOSE[3914] pbx.c: -- Executing [s@macro-outbound-callerid:15] ExecIf("SIP/26-00000096", "0?Set(CALLERPRES()=prohib_passed_screen)") in new stack
[Feb 15 15:18:17] VERBOSE[3914] pbx.c: -- Executing [s@macro-dialout-trunk:12] ExecIf("SIP/26-00000096", "1?AGI(fixlocalprefix)") in new stack
[Feb 15 15:18:17] VERBOSE[3914] res_agi.c: -- Launched AGI Script /var/lib/asterisk/agi-bin/fixlocalprefix
[Feb 15 15:18:17] VERBOSE[3914] res_agi.c: == fixlocalprefix: Dialpattern . matched. 0******** -> 0********
[Feb 15 15:18:17] VERBOSE[3914] res_agi.c: -- <SIP/26-00000096>AGI Script fixlocalprefix completed, returning 0
[Feb 15 15:18:17] VERBOSE[3914] pbx.c: -- Executing [s@macro-dialout-trunk:13] Set("SIP/26-00000096", "OUTNUM=0********") in new stack
[Feb 15 15:18:17] VERBOSE[3914] pbx.c: -- Executing [s@macro-dialout-trunk:14] Set("SIP/26-00000096", "custom=DAHDI/2") in new stack
[Feb 15 15:18:17] VERBOSE[3914] pbx.c: -- Executing [s@macro-dialout-trunk:15] ExecIf("SIP/26-00000096", "0?Set(DIAL_TRUNK_OPTIONS=M(setmusic^))") in new stack
[Feb 15 15:18:17] VERBOSE[3914] pbx.c: -- Executing [s@macro-dialout-trunk:16] Macro("SIP/26-00000096", "dialout-trunk-predial-hook,") in new stack
[Feb 15 15:18:17] VERBOSE[3914] pbx.c: -- Executing [s@macro-dialout-trunk-predial-hook:1] MacroExit("SIP/26-00000096", "") in new stack
[Feb 15 15:18:17] VERBOSE[3914] pbx.c: -- Executing [s@macro-dialout-trunk:17] GotoIf("SIP/26-00000096", "0?bypass,1") in new stack
[Feb 15 15:18:17] VERBOSE[3914] pbx.c: -- Executing [s@macro-dialout-trunk:18] GotoIf("SIP/26-00000096", "0?customtrunk") in new stack
[Feb 15 15:18:17] VERBOSE[3914] pbx.c: -- Executing [s@macro-dialout-trunk:19] Dial("SIP/26-00000096", "DAHDI/2/0********,300,") in new stack
[Feb 15 15:18:17] VERBOSE[3914] app_dial.c: -- Called 2/0********
[Feb 15 15:18:21] VERBOSE[3914] app_dial.c: -- DAHDI/2-1 answered SIP/26-00000096

---

Here the call gets dropped:

---

[/b]
[/size][Feb 15 15:19:23] VERBOSE[3914] pbx.c: -- Executing [h@macro-dialout-trunk:1] Macro("SIP/26-00000096", "hangupcall,") in new stack
[Feb 15 15:19:23] VERBOSE[3914] pbx.c: -- Executing [s@macro-hangupcall:1] GotoIf("SIP/26-00000096", "1?noautomon") in new stack
[Feb 15 15:19:23] VERBOSE[3914] pbx.c: -- Goto (macro-hangupcall,s,3)
[Feb 15 15:19:23] VERBOSE[3914] pbx.c: -- Executing [s@macro-hangupcall:3] NoOp("SIP/26-00000096", "TOUCH_MONITOR_OUTPUT=") in new stack
[Feb 15 15:19:23] VERBOSE[3914] pbx.c: -- Executing [s@macro-hangupcall:4] GotoIf("SIP/26-00000096", "1?skiprg") in new stack
[Feb 15 15:19:23] VERBOSE[3914] pbx.c: -- Goto (macro-hangupcall,s,7)
[Feb 15 15:19:23] VERBOSE[3914] pbx.c: -- Executing [s@macro-hangupcall:7] GotoIf("SIP/26-00000096", "1?skipblkvm") in new stack
[Feb 15 15:19:23] VERBOSE[3914] pbx.c: -- Goto (macro-hangupcall,s,10)
[Feb 15 15:19:23] VERBOSE[3914] pbx.c: -- Executing [s@macro-hangupcall:10] GotoIf("SIP/26-00000096", "1?theend") in new stack
[Feb 15 15:19:23] VERBOSE[3914] pbx.c: -- Goto (macro-hangupcall,s,12)
[Feb 15 15:19:23] VERBOSE[3914] pbx.c: -- Executing [s@macro-hangupcall:12] Hangup("SIP/26-00000096", "") in new stack
[Feb 15 15:19:23] VERBOSE[3914] app_macro.c: == Spawn extension (macro-hangupcall, s, 12) exited non-zero on 'SIP/26-00000096' in macro 'hangupcall'
[Feb 15 15:19:23] VERBOSE[3914] chan_dahdi.c: -- Hungup 'DAHDI/2-1'
[Feb 15 15:19:23] VERBOSE[3914] app_macro.c: == Spawn extension (macro-dialout-trunk, s, 19) exited non-zero on 'SIP/26-00000096' in macro 'dialout-trunk'
[Feb 15 15:19:23] VERBOSE[3914] pbx.c: == Spawn extension (from-internal, 00********, 4) exited non-zero on 'SIP/26-00000096'
[Feb 15 15:20:01] VERBOSE[2679] asterisk.c: -- Remote UNIX connection
[Feb 15 15:20:01] VERBOSE[3919] asterisk.c: -- Remote UNIX connection disconnected
[Feb 15 15:20:03] VERBOSE[2780] netsock.c: == Using SIP RTP TOS bits 184
[Feb 15 15:20:03] VERBOSE[2780] netsock.c: == Using SIP RTP CoS mark 5


Here is my conf files:

DAHDI-CHANNELS.conf

; Span 1: OPVXA1200/12 "OpenVox A1200P/A800P Board 13" (MASTER)
;;; line="1 OPVXA1200/12/0 FXSKS"
signalling=fxs_ks
callerid=asreceived
group=0
context=from-pstn
channel => 1
callerid=
group=
context=default
usecallerid=yes
language=it
tonezone= 11
;;; line="2 OPVXA1200/12/1 FXSKS"
signalling=fxs_ks
callerid=asreceived
group=0
context=from-pstn
channel => 2
callerid=
group=
context=default
language=it
tonezone= 11
;;; line="3 OPVXA1200/12/2 FXSKS"
signalling=fxs_ks
callerid=asreceived
group=0
context=from-pstn
channel => 3
callerid=
group=
context=default
language=it
tonezone= 11
;;; line="4 OPVXA1200/12/3 FXSKS"
signalling=fxs_ks
callerid=asreceived
group=0
context=from-pstn
channel => 4
callerid=
group=
context=default
language=it
tonezone= 11


CHAN_DAHDI.conf
[trunkgroups]

[channels]
context=from-pstn
signalling=fxs_ks
rxwink=300 ; Atlas seems to use long (250ms) winks
usecallerid=yes
hidecallerid=no
callwaiting=yes
usecallingpres=yes
callwaitingcallerid=yes
threewaycalling=yes
transfer=yes
canpark=yes
cancallforward=yes
callreturn=yes
echocancel=yes
echocancelwhenbridged=no
faxdetect=incoming
echotraining=800
rxgain=0.0
txgain=0.0
callgroup=1
pickupgroup=1
progzone=it
;Uncomment these lines if you have problems with the disconection of your analog lines
busydetect=yes
busycount=8
immediate=no
#include dahdi-channels.conf
#include chan_dahdi_additional.conf


DAHDI System.conf

fxsks=1
echocanceller=oslec,1
fxsks=2
echocanceller=oslec,2
fxsks=3
echocanceller=oslec,3
fxsks=4
echocanceller=oslec,4
# channel 5, OPVXA1200/12/4, no module.
# channel 6, OPVXA1200/12/5, no module.
# channel 7, OPVXA1200/12/6, no module.
# channel 8, OPVXA1200/12/7, no module.
# Global data
loadzone = it
defaultzone = it

Hi
Please show me the IRQ information and the result of dahdi_test! You'd better send ssh to me if you can, my Email: This email address is being protected from spambots. You need JavaScript enabled to view it.

hi:
please run the command: cat /proc/inteerupts, show us the result here.

Here is my interrupts:

[root@pbx asterisk]# cat /proc/interrupts
CPU0
0: 61377798 IO-APIC-edge timer
1: 20 IO-APIC-edge i8042
6: 3 IO-APIC-edge floppy
8: 1 IO-APIC-edge rtc
9: 1 IO-APIC-level acpi
14: 85112 IO-APIC-edge ide0
177: 1361823 IO-APIC-level eth0
185: 0 IO-APIC-level Intel 82801DB-ICH4
193: 61318797 IO-APIC-level opvxa1200
NMI: 0
LOC: 61364928
ERR: 0
MIS: 0

Dahdi_test show a result of more than 99,99% of accuracy.

Hi
Please tell me which type of the server or the motherboard you are using! And please send me the output by command 'dmesg'.

I'm using a branded computer (siemens scenic), not a server.

Here is my dmesg output:


Linux version 2.6.18-194.3.1.el5 (This email address is being protected from spambots. You need JavaScript enabled to view it.) (gcc version 4.1.2 20080704 (Red Hat 4.1.2-48)) #1 SMP Thu May 13 13:09:10 EDT 2010
BIOS-provided physical RAM map:
BIOS-e820: 0000000000010000 - 000000000009b800 (usable)
BIOS-e820: 000000000009b800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000003f6f0000 (usable)
BIOS-e820: 000000003f6f0000 - 000000003f6fb000 (ACPI data)
BIOS-e820: 000000003f6fb000 - 000000003f700000 (ACPI NVS)
BIOS-e820: 000000003f700000 - 000000003f780000 (usable)
BIOS-e820: 000000003f780000 - 0000000040000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fed00400 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
BIOS-e820: 00000000ffb80000 - 00000000ffc00000 (reserved)
BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
119MB HIGHMEM available.
896MB LOWMEM available.
Memory for crash kernel (0x0 to 0x0) notwithin permissible range
disabling kdump
Using x86 segment limits to approximate NX protection
On node 0 totalpages: 259968
DMA zone: 4096 pages, LIFO batch:0
Normal zone: 225280 pages, LIFO batch:31
HighMem zone: 30592 pages, LIFO batch:7
DMI present.
Using APIC driver default
ACPI: RSDP (v000 PTLTD ) @ 0x000f7c30
ACPI: RSDT (v001 PTLTD RSDT 0x06040001 LTP 0x00000000) @ 0x3f6f80bc
ACPI: FADT (v001 FSC D152X 0x06040001 0x000f4240) @ 0x3f6f80ec
ACPI: MADT (v001 FSC APIC 0x06040001 CSF 0x00000000) @ 0x3f6faf7e
ACPI: BOOT (v001 PTLTD $SBFTBL$ 0x06040001 LTP 0x00000001) @ 0x3f6fafd8
ACPI: DSDT (v001 FSC D152X 0x06040001 MSFT 0x0100000e) @ 0x00000000
ACPI: PM-Timer IO Port: 0xf008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 15:2 APIC version 20
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Enabling APIC mode: Flat. Using 1 I/O APICs
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 50000000 (gap: 40000000:bec00000)
Detected 2392.479 MHz processor.
Built 1 zonelists. Total pages: 259968
Kernel command line: ro root=/dev/VolGroup00/LogVol00
mapped APIC to ffffd000 (fee00000)
mapped IOAPIC to ffffc000 (fec00000)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
CPU 0 irqstacks, hard=c0768000 soft=c0748000
PID hash table entries: 4096 (order: 12, 16384 bytes)
Console: colour VGA+ 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 1022684k/1039872k available (2177k kernel code, 16368k reserved, 908k data, 228k init, 122304k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay loop (skipped), value calculated using timer frequency.. 4784.95 BogoMIPS (lpj=2392479)
Security Framework v1.0.0 initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
selinux_register_security: Registering secondary module capability
Capability LSM initialized as secondary
Mount-cache hash table entries: 512
CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 00004400 00000000 00000000
CPU: After vendor identify, caps: bfebfbff 00000000 00000000 00000000 00004400 00000000 00000000
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 512K
CPU: Hyper-Threading is disabled
CPU: After all inits, caps: bfebf3ff 00000000 00000000 00000080 00004400 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU0: Intel P4/Xeon Extended MCE MSRs (12) available
CPU0: Thermal monitoring enabled
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
Freeing SMP alternatives: 14k freed
ACPI: Core revision 20060707
CPU0: Intel(R) Pentium(R) 4 CPU 2.40GHz stepping 09
Total of 1 processors activated (4784.95 BogoMIPS).
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
Using local APIC timer interrupts.
Brought up 1 CPUs
sizeof(vma)=84 bytes
sizeof(page)=32 bytes
sizeof(inode)=340 bytes
sizeof(dentry)=136 bytes
sizeof(ext3inode)=492 bytes
sizeof(buffer_head)=52 bytes
sizeof(skbuff)=176 bytes
checking if image is initramfs... it is
Freeing initrd memory: 3234k freed
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xfd987, last bus=2
PCI: Using configuration type 1
Setting up standard PCI resources
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (0000:00)
* The chipset may have PM-Timer Bug. Due to workarounds for a bug,
* this clock source is slow. If you are sure your timer does not have
* this bug, please use "acpi_pm_good" to disable the workaround
PCI quirk: region f000-f07f claimed by ICH4 ACPI/GPIO/TCO
PCI quirk: region f180-f1bf claimed by ICH4 GPIO
PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
PCI: Firmware left 0000:02:08.0 e100 interrupts enabled, disabling
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIH._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: Device [PS2M] status [00000008]: functional but not present; setting present
ACPI: Device [LPT] status [00000008]: functional but not present; setting present
ACPI: Device [ECP] status [00000008]: functional but not present; setting present
ACPI: Device [COM1] status [00000008]: functional but not present; setting present
ACPI: Device [COM2] status [00000008]: functional but not present; setting present
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 9 devices
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
PCI: Bridge: 0000:00:1e.0
IO window: 3000-0000
MEM window: d0100000-00000000
PREFETCH window: disabled.
PCI: Setting latency timer of device 0000:00:1e.0 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
Simple Boot Flag at 0x69 set to 0x1
apm: BIOS not found.
audit: initializing netlink socket (disabled)
type=2000 audit(1298226860.732:1): initialized
highmem bounce pool size: 64 pages
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
SELinux: Registering netfilter hooks
Initializing Cryptographic API
alg: No test for crc32c (crc32c-generic)
ksign: Installing public key data
Loading keyring
- Added public key BCE1B2864502B236
- User ID: CentOS (Kernel Module GPG key)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
Boot video device is 0000:00:02.0
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
Real Time Clock Driver v1.12ac
Non-volatile memory driver v1.2
Linux agpgart interface v0.101 (c) Dave Jones
agpgart: Detected an Intel 845G Chipset.
agpgart: Detected 8060K stolen memory.
agpgart: AGP aperture is 128M @ 0xd8000000
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
brd: module loaded
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ICH4: IDE controller at PCI slot 0000:00:1f.1
PCI: Enabling device 0000:00:1f.1 (0005 -> 0007)
ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 169
ICH4: chipset revision 1
ICH4: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0x2800-0x2807, BIOS settings: hda:DMA, hdb:pio
Probing IDE interface ide0...
hda: ST340014A, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hda: max request size: 512KiB
hda: 78165360 sectors (40020 MB) w/2048KiB Cache, CHS=16383/255/63, UDMA(100)
hda: cache flushes supported
hda: hda1 hda2
ide-floppy driver 0.99.newide
usbcore: registered new driver hiddev
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
PNP: PS/2 Controller [PNP0303:KEYB] at 0x60,0x64 irq 1
PNP: PS/2 controller doesn't have AUX irq; using default 12
serio: i8042 KBD port at 0x60,0x64 irq 1
mice: PS/2 mouse device common for all mice
md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: bitmap version 4.39
TCP bic registered
Initializing IPsec netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
Using IPI No-Shortcut mode
ACPI: (supports S0 S1 S3 S4<6>Time: tsc clocksource has been installed.
S5)
Initalizing network drop monitor service
Freeing unused kernel memory: 228k freed
Write protecting the kernel read-only data: 409k
input: AT Translated Set 2 keyboard as /class/input/input0
ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
USB Universal Host Controller Interface driver v3.0
SCSI subsystem initialized
libata version 3.00 loaded.
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.11.5-ioctl (2007-12-12) initialised: This email address is being protected from spambots. You need JavaScript enabled to view it.
device-mapper: dm-raid45: initialized v0.2594l
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
SELinux: Disabled at runtime.
SELinux: Unregistering netfilter hooks
type=1404 audit(1298226886.231:2): selinux=0 auid=4294967295 ses=4294967295
input: PC Speaker as /class/input/input1
intel_rng: FWH not detected
e100: Intel(R) PRO/100 Network Driver, 3.5.10-k3-NAPI
e100: Copyright(c) 1999-2005 Intel Corporation
ACPI: PCI Interrupt 0000:02:08.0[A] -> GSI 20 (level, low) -> IRQ 177
e100: eth0: e100_probe: addr 0xd0100000, irq 177, MAC addr 00:30:05:51:F2:4F
ACPI: PCI Interrupt 0000:00:1f.3 -> GSI 17 (level, low) -> IRQ 185
ACPI: PCI Interrupt 0000:00:1f.5 -> GSI 17 (level, low) -> IRQ 185
PCI: Setting latency timer of device 0000:00:1f.5 to 64
intel8x0_measure_ac97_clock: measured 50892 usecs
intel8x0: clocking to 48000
i810_smbus 0000:00:02.0: i810/i815 i2c device found.
FDC 0 is a post-1991 82077
lp: driver loaded but no devices found
ACPI: Power Button (FF) [PWRF]
ACPI: Power Button (CM) [PWRB]
ACPI: Mapper loaded
dell-wmi: No known WMI GUID found
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
device-mapper: multipath: version 1.0.5 loaded
EXT3 FS on dm-0, internal journal
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
Adding 1015800k swap on /dev/VolGroup00/LogVol01. Priority:-1 extents:1 across:1015800k
e100: eth0: e100_watchdog: link up, 100Mbps, full-duplex
dahdi: Telephony Interface Registered on major 196
dahdi: Version: 2.3.0.1
dahdi_transcode: Loaded.
INFO-xpp: revision Unknown MAX_XPDS=64 (8*
INFO-xpp: FEATURE: with BRISTUFF support
INFO-xpp: FEATURE: with PROTOCOL_DEBUG
INFO-xpp: FEATURE: with sync_tick() from DAHDI
INFO-xpp_usb: revision Unknown
usbcore: registered new driver xpp_usb
ACPI: PCI Interrupt 0000:02:09.0[A] -> GSI 19 (level, low) -> IRQ 193
OpenVox A800P version: 1.4
OpenVox A800P passed register test
Module 0: Installed -- AUTO FXO (FCC mode)
Module 1: Installed -- AUTO FXO (FCC mode)
Module 2: Installed -- AUTO FXO (FCC mode)
Module 3: Installed -- AUTO FXO (FCC mode)
Module 4: Not installed
Module 5: Not installed
Module 6: Not installed
Module 7: Not installed
Found an OpenVox A800P: Version 1.4 (4 modules)
buffer sync misseed!
buffer re-sync occur from -1 to 3
Unified AP4XX PCI Card Driver
DAHDI Dynamic Span support LOADED
vzaphfc: HFC-S PCI A ISDN (V1.42) loading
wcopenpci: Module loaded
rxt1: no version for "dahdi_hdlc_putbuf" found: kernel tainted.
dahdi_echocan_oslec: Registered echo canceler 'OSLEC'
dahdi: Registered tone zone 11 (Italy)
All TDMoE multiframe span groups are active.
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
IPv6 over IPv4 tunneling driver
eth0: no IPv6 routers present
wcopenpci: Module exit
vzaphfc: HFC-S PCI A ISDN (V1.42) unloaded
DAHDI Dynamic Span support unloaded
Unified AP4XX PCI Card Driver Cleanup
Freed a OpenVox A1200 card
usbcore: deregistering driver xpp_usb
dahdi_transcode: Unloaded.
dahdi: Telephony Interface Unloaded
dahdi: Telephony Interface Registered on major 196
dahdi: Version: 2.3.0.1
dahdi_transcode: Loaded.
INFO-xpp: revision Unknown MAX_XPDS=64 (8*
INFO-xpp: FEATURE: with BRISTUFF support
INFO-xpp: FEATURE: with PROTOCOL_DEBUG
INFO-xpp: FEATURE: with sync_tick() from DAHDI
INFO-xpp_usb: revision Unknown
usbcore: registered new driver xpp_usb
OpenVox A800P version: 1.4
OpenVox A800P passed register test
Module 0: Installed -- AUTO FXO (FCC mode)
Module 1: Installed -- AUTO FXO (FCC mode)
Module 2: Installed -- AUTO FXO (FCC mode)
Module 3: Installed -- AUTO FXO (FCC mode)
Module 4: Not installed
Module 5: Not installed
Module 6: Not installed
Module 7: Not installed
Found an OpenVox A800P: Version 1.4 (4 modules)
buffer sync misseed!
buffer re-sync occur from -1 to 3
Unified AP4XX PCI Card Driver
DAHDI Dynamic Span support LOADED
vzaphfc: HFC-S PCI A ISDN (V1.42) loading
wcopenpci: Module loaded
dahdi_echocan_oslec: Registered echo canceler 'OSLEC'
dahdi: Registered tone zone 11 (Italy)
All TDMoE multiframe span groups are active.
dahdi: Idled echo canceller because of CED rx detected on channel 2
dahdi: Idled echo canceller because of CED rx detected on channel 2
dahdi: Idled echo canceller because of CED rx detected on channel 2
dahdi: Idled echo canceller because of CED rx detected on channel 2
dahdi: Idled echo canceller because of CED rx detected on channel 2
dahdi: Idled echo canceller because of CED rx detected on channel 3