Hi,
Please disable the last lines of /etc/asterisk/chan_dahdi.conf :
;# Flash Operator Panel will parse this file for dahdi trunk buttons
;# AMPLABEL will be used for the display labels on the buttons
;# %c Dahdi Channel number
;# %n Line number
;# %N Line number, but restart counter
;# Example:
;# ;AMPLABEL:Channel %c - Button %n
;# For Dahdi/* buttons use the following
;# (where x=number of buttons to dislpay)
;# ;AMPWILDCARDLABEL(x):MyLabel
[channels]
language=en
; include dahdi extensions defined in FreePBX
#include dahdi-channels.conf
#include chan_dahdi_additional.conf
HI, Ok, the A400E card work fine when lines are disabled.
"dhadi show channels" command respond correctly.
I try a call out to Zap/1 trunk, respond ok,
but incoming calls don`t show any caller id and freepbx don`t route my incoming number to proper extension.
any other suggestion about the caller id ?
Hi,
Please send ssh and the number of PSTN line to me. My Email: This email address is being protected from spambots. You need JavaScript enabled to view it.