A800P on trixbox CE 2.8.0.4

03:02.0 Communication controller: Tiger Jet Network Inc. Tiger3XX Modem/ISDN interface
        Subsystem: Unknown device 9500:0003
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- <perr-
        Latency: 64 (250ns min, 32000ns max)
        Interrupt: pin A routed to IRQ 5
        Region 0: I/O ports at dc00 [size=256]
        Region 1: Memory at dfbff000 (32-bit, non-prefetchable) [size=4K]
        Capabilities: [40] Power Management version 2
                Flags: PMEClk- DSI+ D1- D2+ AuxCurrent=55mA PME(D0+,D1-,D2+,D3hot+,D3cold+)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME+

[trixbox1.localdomain ~]# setup-pstn

--------------------------------------------------------------
Detecting PSTN cards and USB PSTN Devices
--------------------------------------------------------------


PCI Hardware found
Hardware present!



STOPPING ASTERISK
Asterisk ended with exit status 0
Asterisk shutdown normally.
Unable to connect to remote asterisk (does /var/run/asterisk/asterisk.ctl exist?)
Asterisk Stopped

STOPPING FOP SERVER
FOP Server Stopped
Empty configuration -- no spans
Empty configuration -- no spans
Stopping Dahdi service...
Unloading DAHDI hardware modules: done
Starting Dahdi service...
Loading DAHDI hardware modules:
  wct4xxp:                                                 [  OK  ]
  wcte12xp:                                                [  OK  ]
  wct1xxp:                                                 [  OK  ]
  wcte11xp:                                                [  OK  ]
  wctdm24xxp:                                              [  OK  ]
  wcfxo:                                                   [  OK  ]
  wctdm:                                                   [  OK  ]
  wcb4xxp:                                                 [  OK  ]
  wctc4xxp:                                                [  OK  ]
  xpp_usb:                                                 [  OK  ]

No hardware timing source found in /proc/dahdi, loading dahdi_dummy
Running dahdi_cfg:                                         [  OK  ]
Restarting Asterisk...


SETTING FILE PERMISSIONS
Permissions OK

STARTING ASTERISK
Asterisk ended with exit status 1
Asterisk died with code 1.
Automatically restarting Asterisk.
mpg123: no process killed
Asterisk Started

STARTING FOP SERVER
FOP Server Started
   Chan Extension  Context         Language   MOH Interpret        Blocked    State
 pseudo            from-zaptel     en         default                         In Service