×
Notice
The forum is in read only mode.
Forum
Telephony Cards Support
A400/800/1200 Series
Polarity
×
Questions about A400/800/1200 Analog Interface Card
Polarity
16 years 8 months ago #323
by usuarioforum
In Spain the telcos uses polarity switch to hungup and answer the calls. Zaptel modules implement this function. I have a 1200 card and when the call hungup asterisk don't close the call. The lines added to my zapata config file are:
answeronpolarityswitch=yes
hanguponpolarityswitch=yes
Does the 1200 driver implement this?
Cheers.
16 years 8 months ago #324
by miaolin
Yes, A1200P support this feature as TDM400P
16 years 8 months ago #325
by usuarioforum
My asterisk don't hungup the calls. Maybe card suport the feature but is not implemented in the module.
16 years 8 months ago #326
by miaolin
if you are using our module, it should be implemented.
polarity just make sense when you do outbound call, it is useless with inbound call.
16 years 8 months ago #327
by usuarioforum
Miao:
In a incomming call, when the call goes to the voicemail, if the caller hungup the call with TDM400 hungup, but with A1200 no.
16 years 8 months ago #330
by james.zhu
hello, usuarioforum:
have you tried to add the two values in your config?
;busydetect=yes
;busycount=4
good luck!
james.zhu
Forum
Telephony Cards Support
A400/800/1200 Series
Polarity
Time to create page: 0.041 seconds