keywords: ip pbx voip gateway gsm gateway

×

Notice

The forum is in read only mode.
  1. Forum
  3. Telephony Cards Support
  5. A400/800/1200 Series
  7. A400E - doesn't see FXO cards
× Questions about A400/800/1200 Analog Interface Card

A400E - doesn't see FXO cards

12 years 7 months ago #7334 by tdurante
Hi guys,
I'm setting up a PBX with a A400E but DAHDI can't see my FXO cards.

I've installed the DAHDI package provided by Openvox (dahdi-linux-complete-2.4.1.2+2.4.1). It installs with no errors, but when I try to do a dahdi_scan or a dahdi_cfg it doesn't works.

The dahdi_scan returns me nothing and the dahdi_cfg gives me an error saying that it couldn't locate my FXO cards, see:


/etc/dahdi# cat system.confloadzone	= usdefaultzone	= us
fxsks=1fxsks=2fxsks=3fxsks=4

/etc/dahdi# cat modules# Autogenerated by /usr/sbin/dahdi_genconf (Dahdi::Config::Gen::Modules) on Mon Sep 12 12:47:30 2011# If you edit this file and execute /usr/sbin/dahdi_genconf again,# your manual changes will be LOST.wctdm


# dahdi_cfg -vvvvvDAHDI Tools Version - 2.4.1
DAHDI Version: 2.4.1.2Echo Canceller(s): Configuration======================

Channel map:
Channel 01: FXS Kewlstart (Default) (Echo Canceler: none) (Slaves: 01)Channel 02: FXS Kewlstart (Default) (Echo Canceler: none) (Slaves: 02)Channel 03: FXS Kewlstart (Default) (Echo Canceler: none) (Slaves: 03)Channel 04: FXS Kewlstart (Default) (Echo Canceler: none) (Slaves: 04)
4 channels to configure.
DAHDI_CHANCONFIG failed on channel 1: No such device or address (6)

Any idea on why this is happening?

Please see here bellow more information regarding my system. If any further information is needed, please let me know.

Thanks a lot!



My system:


DISTRIB_ID=UbuntuDISTRIB_RELEASE=11.04DISTRIB_CODENAME=nattyDISTRIB_DESCRIPTION="Ubuntu 11.04"
Linux pbx 2.6.38-8-generic-pae #42-Ubuntu SMP Mon Apr 11 05:17:09 UTC 2011 i686 i686 i386 GNU/Linux

# cat /proc/interrupts            CPU0         0:       1474   IO-APIC-edge      timer  8:          1   IO-APIC-edge      rtc0  9:          0   IO-APIC-fasteoi   acpi 16:  599174012   IO-APIC-fasteoi   netjet.1 22:         99   IO-APIC-fasteoi   ehci_hcd:usb1, ehci_hcd:usb2 40:    4613120  HPET_MSI-edge      hpet2 45:      37015   PCI-MSI-edge      ahci 46:     444871   PCI-MSI-edge      eth0-0 47:     475630   PCI-MSI-edge      eth0-1NMI:          0   Non-maskable interruptsLOC:          4   Local timer interruptsSPU:          0   Spurious interruptsPMI:          0   Performance monitoring interruptsIWI:          0   IRQ work interruptsRES:          0   Rescheduling interruptsCAL:          0   Function call interruptsTLB:          0   TLB shootdownsTRM:          0   Thermal event interruptsTHR:          0   Threshold APIC interruptsMCE:          0   Machine check exceptionsMCP:       1433   Machine check pollsERR:          0MIS:          0


# lsmodModule                  Size  Used bywctdm                  40588  0 dahdi                 205492  1 wctdmvesafb                 13449  1 hisax                 509802  0 isdn                  133735  1 hisaxnetjet                 21669  0 isdnhdlc               13091  1 netjetcrc_ccitt              12595  3 dahdi,hisax,isdnhdlcmISDNipac              26213  1 netjetmISDN_core             81562  3 netjet,mISDNipacdcdbas                 14054  0 ghes                   13357  0 hed                    13066  1 ghespower_meter            13706  0 shpchp                 32345  0 lp                     13349  0 parport                36746  1 lpahci                   21591  8 libahci                25548  1 ahcibnx2                   76283  0
12 years 7 months ago #7335 by tdurante
I don't know why the configurations and messages I posted are all messed up. If needed tell me and I'll post them again. But the configuration files on my server are not looking crazy like that.
12 years 7 months ago #7336 by Denins.Den
Please remove the module netjet:

modprobe -r netjet

then reload the wctdm again.
if you don't want to do this every time when you reboot the server, please just remove the netjet.ko file.
12 years 7 months ago #7338 by tdurante
Great! Works perfectly.
Thanks a lot
  1. Forum
  3. Telephony Cards Support
  5. A400/800/1200 Series
  7. A400E - doesn't see FXO cards
Time to create page: 0.038 seconds
Powered by Kunena Forum