keywords: ip pbx voip gateway gsm gateway

×

Notice

The forum is in read only mode.
× Questions about A400/800/1200 Analog Interface Card

A1200P Bad re-sync 2, resetting...

12 years 6 months ago #7514 by warp
Hi,

I have this message in dmesg. And after some time(5-18 hours) all channells be silent. Where the problem?

dahdi: Version: 2.5.0.1
before raise reset
OpenVox A1200P version: 1.4
OpenVox A1200P passed register test
Module 0: Installed -- AUTO FXO (FCC mode)
Module 1: Installed -- AUTO FXO (FCC mode)
Module 2: Installed -- AUTO FXO (FCC mode)
Module 3: Installed -- AUTO FXO (FCC mode)
Module 4: Installed -- AUTO FXO (FCC mode)
Module 5: Installed -- AUTO FXO (FCC mode)
Module 6: Installed -- AUTO FXO (FCC mode)
Module 7: Installed -- AUTO FXO (FCC mode)
Module 8: Installed -- AUTO FXO (FCC mode)
Module 9: Installed -- AUTO FXO (FCC mode)
Module 10: Not installed
Module 11: Not installed
Found an OpenVox A1200P: Version 1.4 (10 modules)
buffer sync misseed!
buffer re-sync occur from 3 to 2
Bad re-sync 2, resetting...
buffer re-sync occur from -1 to 3
buffer re-sync occur from 3 to 2
Bad re-sync 2, resetting...
buffer re-sync occur from -1 to 2
Bad re-sync 2, resetting...
buffer re-sync occur from -1 to 1
Bad re-sync 1, resetting...
buffer re-sync occur from -1 to 1
Bad re-sync 1, resetting...
buffer re-sync occur from -1 to 1
Bad re-sync 1, resetting...
buffer re-sync occur from -1 to 1
Bad re-sync 1, resetting...
buffer re-sync occur from -1 to 1
Bad re-sync 1, resetting...
buffer re-sync occur from -1 to 1
Bad re-sync 1, resetting...
buffer re-sync occur from -1 to 0
buffer re-sync occur from 0 to 3
12 years 6 months ago #7515 by chunlei.yi
please supply the motherboard information to me or give me ssh, i will help you to check it
my email: This email address is being protected from spambots. You need JavaScript enabled to view it.
msn: This email address is being protected from spambots. You need JavaScript enabled to view it.
12 years 6 months ago #7516 by warp
Motherboard Asus M4A78LT-LE . Now i try switch back to dahdi 2.4. On another server with same A1200P and same motherboard all work normal.
12 years 6 months ago #7518 by warp
With dahdi 2.4 all work fine!
Time to create page: 0.033 seconds
Powered by Kunena Forum