- Thank you received: 0
keywords: ip pbx voip gateway gsm gateway
# Contains the list of modules to be loaded / unloaded by /etc/init.d/dahdi.
#
# NOTE: Please add/edit /etc/modprobe.d/dahdi or /etc/modprobe.conf if you
# would like to add any module parameters.
#
# Format of this file: list of modules, each in its own line.
# Anything after a '#' is ignore, likewise trailing and leading
# whitespaces and empty lines.
# Digium TE205P/TE207P/TE210P/TE212P: PCI dual-port T1/E1/J1
# Digium TE405P/TE407P/TE410P/TE412P: PCI quad-port T1/E1/J1
# Digium TE220: PCI-Express dual-port T1/E1/J1
# Digium TE420: PCI-Express quad-port T1/E1/J1
# wct4xxp
# Digium TE120P: PCI single-port T1/E1/J1
# Digium TE121: PCI-Express single-port T1/E1/J1
# Digium TE122: PCI single-port T1/E1/J1
# wcte12xp
# Digium T100P: PCI single-port T1
# Digium E100P: PCI single-port E1
# wct1xxp
# Digium TE110P: PCI single-port T1/E1/J1
# wcte11xp
# Digium TDM2400P/AEX2400: up to 24 analog ports
# Digium TDM800P/AEX800: up to 8 analog ports
# Digium TDM410P/AEX410: up to 4 analog ports
#wctdm24xxp
# X100P - Single port FXO interface
# X101P - Single port FXO interface
wcfxo
# Digium TDM400P: up to 4 analog ports
wctdm
# Digium B410P: 4 NT/TE BRI ports
#wcb4xxp
# Digium TC400B: G729 / G723 Transcoding Engine
#wctc4xxp
# Xorcom Astribank Devices
#xpp_usb
# Autogenerated by /usr/sbin/dahdi_genconf on Fri Feb 3 15:09:40 2012
# If you edit this file and execute /usr/sbin/dahdi_genconf again,
# your manual changes will be LOST.
# Dahdi Configuration File
#
# This file is parsed by the Dahdi Configurator, dahdi_cfg
#
# Global data
loadzone = de
defaultzone = de
# 1-2 fxs ports 3-4 fxo ports
fxoks = 1-4
[trunkgroups]
; No trunk groups are needed in this configuration.
[channels]
; The channels context is used when defining channels using the
; older deprecated method. Don't use this as a section name.
[phone](!)
;
; A template to hold common options for all phones.
;
usecallerid = yes
hidecallerid = no
callwaiting = no
threewaycalling = yes
transfer = yes
immediate = no
context = LocalSets
signalling = fxo_ks ; Uses FXO signaling for an FXS channel
[phone1](phone)
callerid = "Mark Michelson" <5555>
dahdichan = 1
[phone2](phone)
callerid = "David Vossel" <2222>
dahdichan = 2
[phone3](phone)
callerid = "Jason Parker" <1111>
dahdichan = 3
[phone4](phone)
callerid = "Matthew Nicholson" <(256)555-4343>
dahdichan = 4
[1]
active=yes
alarms=OK
description=Wildcard TDM400P REV E/F Board 5
name=WCTDM/4
manufacturer=Digium
devicetype=Wildcard TDM400P REV E/F
location=PCI Bus 05 Slot 01
basechan=1
totchans=4
irq=0
type=analog
port=1,FXS
port=2,FXS
port=3,FXS
port=4,FXS
DAHDI Tools Version - 2.6.0
DAHDI Version: 2.6.0
Echo Canceller(s): HWEC
Configuration
======================
Channel map:
Channel 01: FXO Kewlstart (Default) (Echo Canceler: none) (Slaves: 01)
Channel 02: FXO Kewlstart (Default) (Echo Canceler: none) (Slaves: 02)
Channel 03: FXO Kewlstart (Default) (Echo Canceler: none) (Slaves: 03)
Channel 04: FXO Kewlstart (Default) (Echo Canceler: none) (Slaves: 04)
4 channels to configure.
Setting echocan for channel 1 to none
Setting echocan for channel 2 to none
Setting echocan for channel 3 to none
Setting echocan for channel 4 to none
[16843.036905] dahdi: Telephony Interface Registered on major 196
[16843.036908] dahdi: Version: 2.6.0
[16843.043824] Freshmaker version: 71
[16843.045157] Freshmaker passed register test
[16844.774226] Module 0: Installed -- AUTO FXS/DPO
[16845.998807] Module 1: Installed -- AUTO FXS/DPO
[16847.221042] Module 2: Installed -- AUTO FXS/DPO
[16848.452266] Module 3: Installed -- AUTO FXS/DPO
[16848.464945] Found a Wildcard TDM: Wildcard TDM400P REV E/F (4 modules)
asteriskpbx*CLI> dahdi show channels
No such command 'dahdi show channels' (type 'core show help dahdi show' for other possible commands)
asteriskpbx*CLI> module load chan_dahdi.so
Unable to load module chan_dahdi.so
Command 'module load chan_dahdi.so' failed.
== Parsing '/etc/asterisk/chan_dahdi.conf': == Found
-- Automatically generated pseudo channel
asteriskpbx*CLI> module load chan_dahdi.so
Loaded chan_dahdi.so
== Parsing '/etc/asterisk/chan_dahdi.conf': == Found
-- Automatically generated pseudo channel
== Registered channel type 'DAHDI' (DAHDI Telephony Driver w/PRI)
== Manager registered action DAHDITransfer
== Manager registered action DAHDIHangup
== Manager registered action DAHDIDialOffhook
== Manager registered action DAHDIDNDon
== Manager registered action DAHDIDNDoff
== Manager registered action DAHDIShowChannels
== Manager registered action DAHDIRestart
Loaded chan_dahdi.so => (DAHDI Telephony Driver w/PRI)
asteriskpbx*CLI> dahdi show channels
Chan Extension Context Language MOH Interpret Blocked State
pseudo default default In Service
[trunkgroups]
[channels]
context=from-pstn
signalling=fxs_ks
rxwink=300 ; Atlas seems to use long (250ms) winks
usecallerid=yes
hidecallerid=no
callwaiting=yes
usecallingpres=yes
callwaitingcallerid=yes
threewaycalling=yes
transfer=yes
canpark=yes
cancallforward=yes
callreturn=yes
echocancel=yes
echocancelwhenbridged=no
faxdetect=incoming
echotraining=800
rxgain=0.0
txgain=0.0
callgroup=1
pickupgroup=1
;Uncomment these lines if you have problems with the disconection of your analog lines
busydetect=yes
busycount=3
mmediate=no
#include dahdi-channels.conf