i installed Trixbox 1.1 on a dell connected with Digium TE110P with Adtran 750 FXS's and AP1200 with 12 port FXO's
Problem i am facing is, when ever FXSs user pick up the phone he hear a ring
and hangup. and asterisk CLI shows ;
-- Executing Macro("Zap/11-1", "hangupcall") in new stack
-- Executing ResetCDR("Zap/11-1", "w") in new stack
-- Executing NoCDR("Zap/11-1", "") in new stack
-- Executing Wait("Zap/11-1", "5") in new stack
== Spawn extension (macro-hangupcall, s, 3) exited non-zero on 'Zap/11-1' in macro 'hangupcall'
meaning to say that whenever user pickup the phone, trixbox sends to context [macro-hangupcalls] and hang up.
My zaptel.conf
# Autogenerated by /usr/local/sbin/genzaptelconf -- do not hand edit
# Zaptel Configuration File
#
# This file is parsed by the Zaptel Configurator, ztcfg
#
# It must be in the module loading order
span=1,1,0,esf,b8zs
fxoks=1-24
# Span 1: WCT1/0 "Digium Wildcard TE110P T1/E1 Card 0" B8ZS/ESF RED
# channel 1, WCT1, unhandled for now
# channel 2, WCT1, unhandled for now
# channel 3, WCT1, unhandled for now
# channel 4, WCT1, unhandled for now
# channel 5, WCT1, unhandled for now
# channel 6, WCT1, unhandled for now
# channel 7, WCT1, unhandled for now
# channel 8, WCT1, unhandled for now
# channel 9, WCT1, unhandled for now
# channel 10, WCT1, unhandled for now
# channel 11, WCT1, unhandled for now
# channel 12, WCT1, unhandled for now
# channel 13, WCT1, unhandled for now
# channel 14, WCT1, unhandled for now
# channel 15, WCT1, unhandled for now
# channel 16, WCT1, unhandled for now
# channel 17, WCT1, unhandled for now
# channel 18, WCT1, unhandled for now
# channel 19, WCT1, unhandled for now
# channel 20, WCT1, unhandled for now
# channel 21, WCT1, unhandled for now
# channel 22, WCT1, unhandled for now
# channel 23, WCT1, unhandled for now
# channel 24, WCT1, unhandled for now
# Span 2: OPVXA1200/0 "OpenVox A1200P Board 1"
fxsks=25
fxsks=26
fxsks=27
fxsks=28
fxsks=29
fxsks=30
fxsks=31
fxsks=32
fxsks=33
fxsks=34
fxsks=35
fxsks=36
# Span 3: ZTDUMMY/1 "ZTDUMMY/1 1"
# Global data
loadzone = us
defaultzone = us
Zapata.conf
;
; Zapata telephony interface
;
; Configuration file
[trunkgroups]
[channels]
language=en
context=from-zaptel
signalling=fxs_ks
;rxwink=1050
;rxflash=1050 ; Atlas seems to use long (250ms) winks
;
; Whether or not to do distinctive ring detection on FXO lines
;usedistinctiveringdetection=yes
usecallerid=yes
hidecallerid=no
callwaiting=no
usecallingpres=yes
callwaitingcallerid=yes
threewaycalling=no
transfer=yes
cancallforward=yes
callreturn=yes
echocancel=yes
echocancelwhenbridged=no
echotraining=800
rxgain=0.0
txgain=0.0
busydetect=yes
callprogress=no
busycount=10
group=0
;callgroup=1
;pickupgroup=1
immediate=yes
channel=25-36
;faxdetect=both
;faxdetect=incoming
;faxdetect=outgoing
;faxdetect=no
;Include genzaptelconf configs
#include zapata-auto.conf
group=1
;Include AMP configs
#include zapata_additional.conf
Zapata-auto.conf
; Autogenerated by /usr/local/sbin/genzaptelconf -- do not hand edit
; Zaptel Channels Configurations (zapata.conf)
;
; This is not intended to be a complete zapata.conf. Rather, it is intended
; to be #include-d by /etc/zapata.conf that will include the global settings
;
callerid=asreceived
Incoming is working fine and trixbox sends to the correct extensions and using IAX softphone, i am able to call out to PSTN
Any help is really really appreciated
rdgs