Any instructions to install my A1200P in Elastix?

Dear Mr. Zhu...
I putted this zaptel.conf from my trixbox:
# Autogenerated by ./genzaptelconf -- do not hand edit
# Zaptel Configuration File
#
# This file is parsed by the Zaptel Configurator, ztcfg
#

# It must be in the module loading order


# Span 1: OPVXA1200/0 "OpenVox A1200P Board 1"
fxsks=1
fxsks=2
fxoks=3
# channel 4, OPVXA1200, inactive.
# channel 5, OPVXA1200, inactive.
# channel 6, OPVXA1200, inactive.
# channel 7, OPVXA1200, inactive.
# channel 8, OPVXA1200, inactive.
# channel 9, OPVXA1200, inactive.
# channel 10, OPVXA1200, inactive.
# channel 11, OPVXA1200, inactive.
# channel 12, OPVXA1200, inactive.

# Global data

loadzone = es
defaultzone = es


But still no work...
I´ll continue broking my brain
Thank you very much

hello, jsalinasf:
what's error displayed? how about your zapata.conf? please post your errors here or you msn with me. my msn: This email address is being protected from spambots. You need JavaScript enabled to view it.
Regards!
James.zhu

One more time, i´ve installed my Elastix 0.91 from 5 Dec. 2007
I made an yum upgrade...
repo.elastix.org ... works fineee....

And....

WOW!!!!!

I push in the hardware detection.... Anddd....

Tachannnnnnnnnnnn!!!!

Hardware Detection
Replace file zapata.conf
PCI Slot # 1: OPVXA1200/0 "OpenVox A1200P Board 1"
Port # 1
FXO


Port # 2
FXO


Port # 3
FXS


Port # 4
FXO


Port # 5
FXO


Port # 6
FXO


Port # 7
FXO


Port # 8
FXO


Port # 9
FXO


Port # 10
FXO


Port # 11
FXO


Port # 12
FXO


# This file is parsed by the Zaptel Configurator, ztcfg
#

# It must be in the module loading order


# Span 1: OPVXA1200/0 "OpenVox A1200P Board 1"
fxsks=1
fxsks=2
fxoks=3
# channel 4, WCTDM, no module.
# channel 5, WCTDM, no module.
# channel 6, WCTDM, no module.
# channel 7, WCTDM, no module.
# channel 8, WCTDM, no module.
# channel 9, WCTDM, no module.
# channel 10, WCTDM, no module.
# channel 11, WCTDM, no module.
# channel 12, WCTDM, no module.


All seems to work ok... I´ll configure it now....

Happy Christmas

hi
i have a same error to
and have same problem in detect channel
and test any (every) solution about it
and google this and found this page
and my brain is broken to ...
please help me .....................................

Hi alimd:
you should double check the file zapata.conf, make sure you the line "#include zapata-channels.conf" has been added.