×
Notice
The forum is in read only mode.
Forum
Telephony Cards Support
A400/800/1200 Series
Urgent Asterisknow
×
Questions about A400/800/1200 Analog Interface Card
Urgent Asterisknow
16 years 2 months ago #700
by hansm
is the A800P version working with asterisknow beta 6 out of the box without any driver?
i think not. i just need a confirmation from a expert who is SURE!!!
Did see a nice auction on ebay for this card but its expring in 8 hours.
i checked the /etc/sysconfig/zaptel file and only can see the follow cards:
MODULES="$MODULES tor2" # T400P - Quad Span T1 Card
# E400P - Quad Span E1 Card
MODULES="$MODULES wct4xxp" # TE405P - Quad Span T1/E1 Card (5v version)
# TE410P - Quad Span T1/E1 Card (3.3v version)
#wct4xxp_ARGS="t1e1override=15" # Additional parameters for TE4xxP driver
MODULES="$MODULES wct1xxp" # T100P - Single Span T1 Card
# E100P - Single Span E1 Card
MODULES="$MODULES wcte11xp" # TE110P - Single Span T1/E1 Card
MODULES="$MODULES wctdm24xxp" # TDM2400P - Modular FXS/FXO interface (1-24 ports)
MODULES="$MODULES wcfxo" # X100P - Single port FXO interface
# X101P - Single port FXO interface
MODULES="$MODULES wctdm" # TDM400P - Modular FXS/FXO interface (1-4 ports)
#MODULES="$MODULES wcfxs" # either above or this
MODULES="$MODULES wcusb" # S100U - Single port FXS USB Interface
#MODULES="$MODULES wcfxsusb" # either above or this
#MODULES="$MODULES torisa" # Old Tormenta1 ISA Card
#MODULES="$MODULES ztdummy" # UHCI USB Zaptel Timing Only Interface
#MODULES="$MODULES xpp_usb" # Xorcom Astribank Device
16 years 2 months ago #701
by james.zhu
hello, hansm:
I think it should work with A880P. what you can do is that you have to recompile the zatel with A800P driver. the A800P can be found from openvox website. before compiling A800P., you need to add the opvxa1200 in to Makefile and zaptel.sysconfig and after recompiling, the system should detect the card.
Regards,
James.zhu
Forum
Telephony Cards Support
A400/800/1200 Series
Urgent Asterisknow
Time to create page: 0.032 seconds