i have 2 cards of a400p
one card have 4 red modules.
another one card have 2 red modules and 2 green modules.
my question is
what modules that i should to plug with calling OUT line.
now i plug 6 phone lines to red modules for receving call.
and i use trixbox.
i think green modules is for calling OUT line but when i plug in phone line to it
i can't calling out.
but i can calling out from line that plugged in red modules.
i don't know why, and what green modules are using for?
thank.
(sorry for my english)
hello, gaizers:
the red modules are used to connect with PSTN line(the line is from telcom), and green modules are used to connect with your analog phone if you have. before making calls, you have to configure the extensions from GUI and set each green modules for different extensions numbers for example, 600,601,602 and you also need to set a inbound trunks and outbound trunks for handling incoming calls and outgoing calls. take a particular attention to the modules, if you plugin a wrong cable for modules, it might cause the hardware damage. please take time to study on it.
Regards,
James.zhu
arrrr , i see
red modules must connect to line from my telecom and can calling-in , calling-out, that right?
and green modules must connect to my analog telephone for act as x-lite, that right?
thank for your help.