No DID on incoming calls - Trixbox 2.4.2, A400P, PSTN, Italy

Hi,

is there any chance to detect the incoming call's number with an A400P card?
I'm using Trixbox 2.4.2, Asterisk 1.4.18, zaptel 1.4.8 on a PSTN line from Fastweb, an italian telco.

My zapata.conf contains the following lines:
language=it
context=from-zapata
signalling=fxs_ks
rxwink=300 ; Atlas seems to use long (250ms) winks
usecallerid=yes
hidecallerid=no
callwaiting=yes
usecallingpres=yes
callwaitingcallerid=yes
threewaycalling=yes
transfer=yes
cancallforward=yes
callreturn=yes
echocancel=yes
echocancelwhenbridged=no
rxgain=0.0
txgain=0.0
group=0
callgroup=1
pickupgroup=1
immediate=no
busydetect=6
callprogress=yes
cidsignalling=dftm,dtmf_dk,dtmf_astart
cidstart=ring,polarity
sendcalleridafter=2

The asterisk console shows me the following log line on incoming calls:
Executing [s@from-zaptel] NoOp("Zap/1-1", "Entering from-zaptel with DID == ") in new stack

Thanks

hello, sante:
how is your loadzone and defaultzone in zaptel.conf? try to load wctdm with opermode=italy.
Regards,
James.zhu

I think you have to know the format of cid on your line and set it up correctly in zapata.conf

If you have difficulty. Let us know.

Hi James,

i did load wctdm module the way you suggested, but it doesn't seem to work.
I added
[code:1]options wctdm opermode=ITALY[/code:1]
to /etc/modprobe.conf
In my zaptel.conf there were already the following lines:

[code:1]# Span 1: WCTDM/0 "Wildcard TDM400P REV E/F Board 1"
fxsks=1
fxsks=2
fxsks=3
# channel 4, WCTDM, no module.

# Global data

loadzone = it
defaultzone = it
[/code:1]

When i call from a mobile to the pstn i still get:
[code:1]Executing [s@from-zaptel:1] NoOp("Zap/1-1", "Entering from-zaptel with DID == ") in new stack[/code:1]

Regards

[quote:8248204901="james.zhu"]hello, sante:
how is your loadzone and defaultzone in zaptel.conf? try to load wctdm with opermode=italy.
Regards,
James.zhu[/quote]

cidsignalling=dftm,dtmf_dk,dtmf_astart
cidstart=ring,polarity

your zapata.conf seem not correct? you have to just use one of these options, i.e ( for example)

cidsignalling=dtmf
cidstart=ring


etc..