×
Notice
The forum is in read only mode.
-
Forum
-
Telephony Cards Support
-
A400/800/1200 Series
-
A-1200P O口模块,振铃后,接通,没有声
×
Questions about A400/800/1200 Analog Interface Card
A-1200P O口模块,振铃后,接通,没有声
16 years 1 month ago #805
by lailai
电话呼出完全正常,我确信,我测试了很多次,但是接入的时候就完全么有声音
我连接了一个 IAX2 的电话,用它接听的时候只能听到忙音,然后就自动挂断
16 years 1 month ago #806
by lailai
-- Accepting AUTHENTICATED call from 172.18.92.203:
> requested format = speex,
> requested prefs = (),
> actual format = gsm,
> host prefs = (),
> priority = mine
-- Executing Dial("IAX2/5001-4", "Zap/g3/15929489436|60|rt") in new stack
-- Called g3/15929489436
-- Zap/5-1 answered IAX2/5001-4
-- Hungup 'Zap/5-1'
== Spawn extension (totestconf, 015929489436, 1) exited non-zero on 'IAX2/5001-4'
-- Hungup 'IAX2/5001-4'
呼出的Consle 现在 中间双方通话很久,声音清晰
16 years 1 month ago #807
by lailai
有人知道怎么回事么? 请回答我的问题啊, 很急。。。 谢谢
16 years 1 month ago #808
by james.zhu
have to try to get a SIP phone to test that. you use xlite and let the call forward to sip phone.
Regards,
James.zhu
16 years 1 month ago #809
by lailai
如果这边不接板卡,而是接普通电话,那我通话的过程中就没有问题, 我现在试试SIP CALL , 我想问一下,A1200P 的板卡O口 模块是不是普通电话能用的就PSTN网络板卡就可以支持,有没有什么情况下普通电话可以接入,但是板卡不能用的情况?
16 years 1 month ago #810
by miaolin
中继分出来的号码?什么意思?你用的是isdn ta 分出来2个内线接到fxo上?
-
Forum
-
Telephony Cards Support
-
A400/800/1200 Series
-
A-1200P O口模块,振铃后,接通,没有声
Time to create page: 0.039 seconds