A-1200P O口模块，振铃后，接通，没有&#22768

hi:
please change to 6 or higher and set busydetact=6.
Regards,
James.zhu

Verbosity was 0 and is now 9
-- Starting simple switch on 'Zap/5-1'
-- Executing Answer("Zap/5-1", "") in new stack
-- Executing Wait("Zap/5-1", "1") in new stack
-- Executing Queue("Zap/5-1", "queuesub1|t") in new stack
-- Started music on hold, class 'default', on Zap/5-1
-- Called IAX2/5001
-- Call accepted by 172.18.92.203 (format gsm)
-- Format for call is gsm
-- IAX2/5001-2 is ringing
-- IAX2/5001-2 answered Zap/5-1
-- Stopped music on hold on Zap/5-1
-- Hungup 'IAX2/5001-2'
== Spawn extension (zapcall, s, 3) exited non-zero on 'Zap/5-1'
-- Hungup 'Zap/5-1'


rxgain=20
txgain =20
busycount=4

可以接通，但是听不到声音 在IAX2 的电话中可以听到杂音，很大的杂音，然后就是挂断的忙音，但是测试的呼叫手机，一点声音都没有，连音乐也没有

hello, friend:
please check the values, do not set so high. it might damage the hardware.
can you try it in this way?
zapcall]
exten => s,1,Answer()
exten => s,2,Wait(1)
exten => s,3,Dial(IAX2/5001)
exten => s,4,Hangup

-- Starting simple switch on 'Zap/5-1'
-- Executing Answer("Zap/5-1", "") in new stack
-- Executing Wait("Zap/5-1", "1") in new stack
-- Executing Dial("Zap/5-1", "IAX2/5001") in new stack
-- Called 5001
-- Call accepted by 172.18.92.203 (format gsm)
-- Format for call is gsm
-- IAX2/5001-2 is ringing
-- IAX2/5001-2 answered Zap/5-1
-- Hungup 'IAX2/5001-2'
== Spawn extension (zapcall, s, 3) exited non-zero on 'Zap/5-1'
-- Hungup 'Zap/5-1'

in my IAX2 Phone i just hear a busy; and then hangup ;and my mobile for test hear nothing

$$$$$ i have change back the rxgain and txgain to 6 ,so it hangup sooner than befor rxgain and txgain is 15

你确信电话呼出就一切正常？只是呼入没有声音？

同一个机器，相同的配置，接入不同的电话后，就出现这个问题

我以前测试的电话接入时候，完全正常

现在在使用的时候，接入的是一个从中继分出来的号码，5566 是中继号，下面有两个号码 6676 6678 ，如果5566 忙 则接入 6676 或者 6678 在这个情况的号码接入的时候，就出现，呼入电话没有声音，接听的内部电话，听到忙音的情况