asterisk + A800 + FXS question

Hello !

I have siemens phone connected to FXS on A800. While call in progress I have tap phone for less than 1 second. Asterisk don't detect hangup and I hear only silence in phone.
How to solve this problem ? May be I can change some timer paranmeters in zaptel driver for A800 or I need to change asterisk configs ?
Thanks for help !

hello, aospan:
please check the parameters(busydetect and busycount) and set it in different values.
Regards!
james.zhu

what does the "While call in progress I have tap phone for less than 1 second" mean?

[quote:f01238cf57="james.zhu"]hello, aospan:
please check the parameters(busydetect and busycount) and set it in different values.
Regards!
james.zhu[/quote]

I have set in /etc/asterisk/zapata.conf following lines:

group=2
context=numberplan-custom-1
switchtype=national
signalling=fxo_ks
pulsedial=yes
channel => 32
channel => 33
busydetect=yes
busycount=6

but busydetect and busycount don't help. I think this is because I don't have any tone ("beep-beep") in line because I'm using passive phone (siemens euroset 5010).

In statement "While call in progress I have tap phone for less than 1 second" I mean that I put "handset" for time less than 1 sec (fast).

Hi:
please genzaptelconfig -sdvM to generate right files. channels=32,33, i am confusing that.
Regards!
James.zhu

[quote:4aaf403232="james.zhu"]Hi:
please genzaptelconfig -sdvM to generate right files. channels=32,33, i am confusing that.
Regards!
James.zhu[/quote]

It's ok. I have One E1 card (Openvox TE110P) and one A800/1200 card:
dmesg:
TE110P: Setting up global serial parameters for E1 FALC V1.2
TE110P: Successfully initialized serial bus for card
Found a Wildcard: Digium Wildcard TE110P T1/E1

OpenVox A1200P version: 1.2
OpenVox A1200P passed register test
Module 0: Installed -- AUTO FXS/DPO
Module 1: Installed -- AUTO FXS/DPO
Module 2: Installed -- AUTO FXO (FCC mode)
Module 3: Installed -- AUTO FXO (FCC mode)
Module 4: Not installed
Module 5: Not installed
Module 6: Not installed
Module 7: Not installed
Module 8: Not installed
Module 9: Not installed
Module 10: Not installed
Module 11: Not installed
Found a OpenVox A1200P: Version 1.2 (4 modules)
buffer re-sync occur from 0 to 3
Registered tone zone 40 (Russian Federation)
TE110P: Span configured for CCS/HDB3/CRC4

netup_streamer*CLI> zap show channels
Chan Extension Context Language MOH Interpret
pseudo numberplan-cust default
1 numberplan-cust default
2 numberplan-cust default
3 numberplan-cust default
4 numberplan-cust default
5 numberplan-cust default
6 numberplan-cust default
7 numberplan-cust default
8 numberplan-cust default
9 numberplan-cust default
10 numberplan-cust default
11 numberplan-cust default
12 numberplan-cust default
13 numberplan-cust default
14 numberplan-cust default
15 numberplan-cust default
17 numberplan-cust default
18 numberplan-cust default
19 numberplan-cust default
20 numberplan-cust default
21 numberplan-cust default
22 numberplan-cust default
23 numberplan-cust default
24 numberplan-cust default
25 numberplan-cust default
26 numberplan-cust default
27 numberplan-cust default
28 numberplan-cust default
29 numberplan-cust default
30 numberplan-cust default
31 numberplan-cust default
32 numberplan-cust default
33 numberplan-cust default
34 incoming default
35 incoming default
netup_streamer*CLI> pri show span 1
Primary D-channel: 16
Status: Provisioned, Up, Active
Switchtype: EuroISDN
Type: Network
Window Length: 0/7
Sentrej: 0
SolicitFbit: 0
Retrans: 0
Busy: 0
Overlap Dial: 0
T200 Timer: 1000
T203 Timer: 10000
T305 Timer: 30000
T308 Timer: 4000
T309 Timer: -1
T313 Timer: 4000
N200 Counter: 3