Elastix1.1-2 receiving Calleriid problems来电显示的问题

In Elastix1.1-2 how to set to receive callerid(caller id) ?

the step on the manual "A800P_A1200P-User-Manual.pdf" seems like not suitable for elastix.

请问在Elastix1.1-2中，如何让来电显示calerid？

网上的手册A800P_A1200P-User-Manual.pdf，似乎不适用在elastix上。

hi:
yes, the user manual is not for elastix. it is for asterisk+zaptel+centos environment. please check the link from:
www.openvox.com.cn/bbs/viewtopic.php?t=343 and please post your zapta.conf with your modules.
regards!
James.zhu

hi, James
the following steps

you can replace the chan_zap.c in asterisk source code , wctdm.c and put opvxa1200.c in zaptel/kernel
compiling zaptel in this way for A1200P/A800P
1) add opvxa1200 in topmodule(TOPDIR_MODULES:=) in Makefile
2) add opvxa1200.o: kernel/wctdm.h kernel/zaptel.h
find the line as below:
ztprovision.o: kernel/zaptel.h
ztmonitor.o: kernel/zaptel.h
opvxa1200.o: kernel/zaptel.h kernel/wctdm.h
ztspeed: CFLAGS=
3) make and make install.

, I do not run. For Elastix, the path is different, I think.

my zapata.conf
[code:1][trunkgroups]

[channels]
context=from-pstn
signalling=fxs_ks
rxwink=300 ; Atlas seems to use long (250ms) winks
usecallerid=yes
hidecallerid=no
callwaiting=yes
usecallingpres=yes
callwaitingcallerid=yes
threewaycalling=yes
transfer=yes
canpark=yes
cancallforward=yes
callreturn=yes
echocancel=yes
echocancelwhenbridged=no
faxdetect=incoming
echotraining=800
rxgain=4.0
txgain=2.0
callgroup=1
pickupgroup=1

;Uncomment these lines if you have problems with the disconection of your analog lines
;busydetect=yes
;busycount=3


immediate=yes ;

#include zapata_additional.conf
#include zapata-channels.conf

;080616add
cidsignalling=dtmf
cidstart=polarity
[/code:1]

hi,
please download the source code for asterisk and zaptel. you can unzip those files under /usr/src/ and edit the makefile under zaptel folder.
regards!
james.zhu

全世界的來電顯示主要分為四個大區。

-Bellcore FSK(美加及香港)
-ETSI FSK(歐洲及台灣)
-JT FSK(日本)
-DTMF(台灣，印度)

請問

(1)A800的新Driver是適用在那些區？

(2)trixbox或elastix內建的Driver又是適用在那區？

hello,
please check with zapata.conf, there are many formats asterisk can support.
no matter you are using trixbox or elastix or pure asterisk, all are defined in zapata.conf. of course, asterisk i believe, supports the countries you mentioned, otherwise, asterisk can not be so widely used.
Regards!
James.zhu