Help for FXS module

Hello to all,
I've a asterisk 1.4.8 with zaptel 1.4.10 and module opvxa1200.
Asterisk start correctly but I don't have dial tone on analog phone; the telephone is on, the volts are ok.


This is the ztcfg output:

[code:1]
ztcfg -vvvv

Zaptel Version: 1.4.10
Echo Canceller: MG2
Configuration
======================


Channel map:

Channel 01: FXO Kewlstart (Default) (Slaves: 01)
Channel 02: FXO Kewlstart (Default) (Slaves: 02)
Channel 03: FXO Kewlstart (Default) (Slaves: 03)
Channel 04: FXS Kewlstart (Default) (Slaves: 04)

4 channels to configure.

[/code:1]


This is the fxstest output:

[code:1]./fxstest /dev/zap/1 stats
TIP: -5.6400 Volts
RING: -54.1440 Volts
VBAT: -62.4160 Volts
[/code:1]


First try - the telephone ring but no tone:

[code:1]
./fxstest /dev/zap/1 ring
Ringing phone...
Phone is ringing...
[/code:1]


Second try - the telefone is off and:

[code:1]
./fxstest /dev/zap/1 ring
Ringing phone...
Unable to ring phone...
[/code:1]


fxstest output after second try:

[code:1]
./fxstest /dev/zap/1 stats
TIP: 0.0000 Volts
RING: 0.0000 Volts
VBAT: -75.5760 Volts
[/code:1]


Zaptel restart:

[code:1]
/etc/init.d/zaptel restart
Unloading zaptel hardware drivers:.
Loading zaptel framework: done.
Waiting for zap to come online...OK
Loading zaptel hardware modules: tor2.
wct4xxp.
wcte12xp.
wct1xxp.
wcte11xp.
wctdm24xxp.
wcfxo.
wctdm.
wcusb.
xpp_usb.
opvxa1200.
Running ztcfg: done.
[/code:1]


dmesg:

[code:1]
Freed a OpenVox A1200 card
usbcore: deregistering interface driver xpp_usb
usbcore: deregistering interface driver wcusb
Unregistered Tormenta2
Zapata Telephony Interface Unloaded
Zapata Telephony Interface Registered on major 196
Zaptel Version: 1.4.10
Zaptel Echo Canceller: MG2
Registered Tormenta2 PCI
usbcore: registered new interface driver wcusb
Wildcard USB FXS Interface driver registered
INFO-xpp: revision trunk-r5512 MAX_XPDS=64 (8*
INFO-xpp: FEATURE: without BRISTUFF support
INFO-xpp: FEATURE: with PROTOCOL_DEBUG
INFO-xpp: FEATURE: with ECHO_SUPPRESSION
INFO-xpp: FEATURE: without XPP_EC_CHUNK
INFO-xpp: FEATURE: with sync_tick() from ZAPTEL
INFO-xpp_usb: revision trunk-r5512
usbcore: registered new interface driver xpp_usb
OpenVox A1200P version: 1.2
OpenVox A1200P passed register test
Module 0: Installed -- AUTO FXS/DPO
Module 1: Installed -- AUTO FXS/DPO
Module 2: Installed -- AUTO FXS/DPO
Module 3: Installed -- AUTO FXO (ITALY mode)
Module 4: Not installed
Module 5: Not installed
Module 6: Not installed
Module 7: Not installed
Module 8: Not installed
Module 9: Not installed
Module 10: Not installed
Module 11: Not installed
Found a OpenVox A1200P: Version 0.0 (4 modules)
Registered tone zone 11 (Italy)
[/code:1]


after restart zaptel I've the correct volts:

[code:1]
./fxstest /dev/zap/1 stats
TIP: -5.6400 Volts
RING: -54.1440 Volts
VBAT: -62.4160 Volts
[/code:1]


I don't have a sound card in this system, is a problem?
Can you help me?

My configurations are in attachment file.
Thank a lot. Bye.

Your zapata.conf do not include any channels, please add some channel into it, or try to include the zapata-channels.conf into it.

Hello, thank you for reply.
I have the include in my zapata.conf, look my config file.

[code:1]
[channels]
language=it

#include zapata-channels.conf
[/code:1]

I think that the A800P don't make an hungup and, at my second try, the module il busy. I've posted the fxstune result, in asterisk log I read:

first try:

[code:1]
localhost*CLI> console dial 6001
[Jun 22 09:28:06] WARNING[16372]: chan_oss.c:682 setformat: Unable to re-open DSP device /dev/dsp: No such file or directory
-- Executing [6001@default:1] NoOp("OSS/dsp", ""Call for "6001") in new stack
-- Executing [6001@default:2] Dial("OSS/dsp", "ZAP/1|60") in new stack
[Jun 22 09:28:06] WARNING[16375]: chan_zap.c:1829 zt_call: cidspill already exists??
-- Called 1
localhost*CLI> console hangup
-- Hungup 'Zap/1-1'
== Spawn extension (default, 6001, 2) exited non-zero on 'OSS/dsp'
<< Hangup on console >>
[/code:1]


second try:

[code:1]
localhost*CLI> console dial 6001
[Jun 22 09:28:32] WARNING[16372]: chan_oss.c:682 setformat: Unable to re-open DSP device /dev/dsp: No such file or directory
-- Executing [6001@default:1] NoOp("OSS/dsp", ""Call for "6001") in new stack
-- Executing [6001@default:2] Dial("OSS/dsp", "ZAP/1|60") in new stack
[Jun 22 09:28:32] WARNING[16381]: chan_zap.c:1867 zt_call: Unable to ring phone: Device or resource busy
-- Couldn't call 1
-- Hungup 'Zap/1-1'
== Everyone is busy/congested at this time (0:0/0/0)
-- Executing [6001@default:3] Congestion("OSS/dsp", "") in new stack
localhost*CLI> console hangup
== Spawn extension (default, 6001, 3) exited non-zero on 'OSS/dsp'
<< Hangup on console >>
[/code:1]

Thank you,
Dario.

hi:
can you show me your "zap show channels" from asterisk console?
regards!
James.zhu

Please add my msn This email address is being protected from spambots. You need JavaScript enabled to view it. and have a date to debug it. I will online today.