Kernel Dazed and confused, but trying to continue

hello:
can you post some extra info or dmesg info form the system or give me ssh?
regards!
James.zhu

For sure...I'll attach the dmesg and lshw output...for ssh we must accord to a time slice and to do this it would be usefull a more fast and reliable comunication channell...such skype chat or msn chat...write me also in pvt if u prefer to reach agreement...

hello:
please check this:
================================
NETJet setup_instance: protocol is 0 layermask is 0
NETJet card f76a4800 dch f76a4910 bch1 f76a4a94 bch2 f76a4c18
NETJet1 ISAC STAR 0
NETJet1 ISAC MODE 0
NETJet1 ISAC ADF2 0
NETJet1 ISAC ISTA 0
NETJet1 ISAC CIR0 0
mISDN_isac_init: ISAC version (0): 2086/2186 V1.1
NETJet1 B1 tiger: send buf f76ab000 - f76ab7fc
NETJet1 B1 tiger: rec buf f76ac000 - f76ac1fc
NETJet1 B1 tiger: dmacfg 376ac000/376ab000 pulse=0
NETJet 1 cards installed
ISDN L1 driver version 1.20
Zapata Telephony Interface Registered on major 196
Zaptel Version: 1.4.12.1
Zaptel Echo Canceller: MG2
ISDN L2 driver version 1.32
mISDN: INTERNAL ERROR in /home/dax/tmp/mISDN-1_1_9.1/drivers/isdn/hardware/mISDN/stack.c:1175
release_l1 id 100
mISDNd: addr(f0000) prim(f1980) failed err(-92)
lp: driver loaded but no devices found
ACPI: Power Button (FF) [PWRF]
===============================
are you using mISDN? the netjet will cause a problem with the a800p. please remove the netjet from mISDN, or remove whole mISDN package if you are not using that.
regards!
James.zhu

OK I try but I need ISDN..it's the OpenVOX B100P I bought and installed to connect the server to the ISDN line I own...
Do I have to use bristuff instead? Let me know ho to use both B100P and A800P...

I've blacklisted the netjetpci module now zaptel initalize succesfully the card...but the message Dazed and confused...is still present...it appears in all the tty and dmesg...as soon as I insert the opvxa1200 module...now this is my dmesg before and after the loading of the opvxa1200 module... this is my kernel cmdline:
ro root=/dev/sda2 video=vesafb vga=0x313 acpi=force psmouse.proto=imps psmouse.rate=100 nmi_watchdog=0 hpet=enable elevator=deadline

hello:
could you able to try set the boot cmd in this way: nmi_watchdog=0 pci=norouteirq acpi=off pci=noacpi noapic
regards!
James.zhu