keywords:pbx ip pbx voip gateway gsm gateway

× Questions about A400/800/1200 Analog Interface Card

no beep with a1200p

10 years 1 week ago #3933 by Trotz07
There are OpenVox A1200P (8FXS) and OpenVox A800P (5FXO) with connected PSTN. I've installed all drivers. But i have no beep in telephone. I use asterisk 1.6 with dahdi on gentoo. What i do wrong? :L Configuration files i've used are included in the message.
*CLI> dahdi show channels
Chan Extension Context Language MOH Interpret Blocked State
pseudo default default In Service
1 from-pstn default In Service
2 from-pstn default In Service
3 from-pstn default In Service
4 from-pstn default In Service
5 from-pstn default In Service
13 from-internal default In Service
14 from-internal default In Service
15 from-internal default In Service
16 from-internal default In Service
17 from-internal default In Service
18 from-internal default In Service
19 from-internal default In Service
20 from-internal default In Service

why i have no beep in my telephone?
Attachments:
10 years 1 week ago #3934 by Robert
hi
Please send the output of dmesg to us, and check if you have provided power for A1200p.
10 years 1 week ago #3935 by Trotz07
here it is:
Attachments:
10 years 1 week ago #3936 by Trotz07
I think that i have provided power for A1200p -- i have put molex in the card --there are green leds on it
10 years 1 week ago #3937 by Robert
Could you please send your ssh to :
This email address is being protected from spambots. You need JavaScript enabled to view it.
10 years 1 week ago #3938 by Trotz07
OK. I have send my ssh. Have you got it?
Time to create page: 0.025 seconds
Powered by Kunena Forum