keywords: ip pbx voip gateway gsm gateway

× Questions about A810/1610/2410 Advanced Analog Interface Card

CallerID not working on AE2410P

8 years 11 months ago #9417 by mtaller
Hi everyone !
My hardware :
- Elastix 2.4.0
- Asterisk 11.7.0
- Dahdi 2.8.0.1
- OpenVox A2410P: Version 1.4 (24 modules (20 FXO, 4 FXS),Build 0x1a13142


Yesterday, I had compile drivers from OpenVox ( http://downloads.openvox.cn/pub/ ... -2.8.0+2.8.0.tar.gz )
CallerID worked,

Today, no more calleridI have reinstall fresh Elastix, still no callerid

We are in Canada, so we use same standard as USA
I have add in /etc/asterisk/chan_dahdi.conf
cidsignalling=bell
cidstart=ring

Still no callerid

I search on the web and see many thread about drivers patch, but all thread are from 3-4 year ago.

CallerID work perfectly with our old analog PBX, so I can say that CID are send correctly on analog lines.
I also try with an analog phone connected on the line and CID work.

Someone can help me ?

i] Last edited by mtaller at 2014-2-13 03:42 [/i
8 years 11 months ago #9418 by chunlei.yi
hi,

pls provide the remote access information to me, i will help you to check it.

skype:chunlei.yi
8 years 11 months ago #9427 by mtaller
I sent you a private message with remote access informationThanks you
8 years 11 months ago #9428 by chunlei.yi
hi,

i have help you to update the dahdi driver, you can try again.if still have problem,pls send the line number to me.i need to do a test.
8 years 11 months ago #9430 by mtaller
Still nothing.

I will contact our analog lines provider to check with them to known own CID are send.
I will give you news at begining of next week

Thanks you
8 years 11 months ago #9444 by mtaller
I have check with our analog lines provider, the CID feature are enable on our lines and are send with north America standard.
Time to create page: 0.038 seconds
Powered by Kunena Forum