TE210P E1 no Dialing

I have installed a trixbox 2.6.1.13 with a TE210P an a simple HFC Card. The HFC Card use the misdn driver and is working without problems.
The TE210P is connecting to a Marconi NT-SDSLT E1 which is connecting to the provider Arcor.
The Arcor connection are working fine with an other asterisk server over E1.
I switched the fine working CAT5 cable from the other tkserver to my and I can not dial out.

I tried different channels how you can see above. I also test both ports and reseting the marconi. The b-channels coming up correctly.


-- Executing [s@macro-dialout-trunk] Dial("SIP/201-08648d50", "ZAP/g0/03079707368|300|") in new stack
-- Requested transfer capability: 0x00 - SPEECH
-- Called g0/03079707368
-- Zap/1-1 is proceeding passing it to SIP/201-08648d50
-- B-channel 0/17 successfully restarted on span 1
-- Channel 0/1, span 1 got hangup request, cause 28
-- Hungup 'Zap/1-1'
== Everyone is busy/congested at this time (1:0/0/1)
-- Executing [s@macro-dialout-trunk] Goto("SIP/201-08648d50", "s-CHANUNAVAIL|1") in new stack
-- Goto (macro-dialout-trunk,s-CHANUNAVAIL,1)
-- Executing [s-CHANUNAVAIL@macro-dialout-trunk] GotoIf("SIP/201-08648d50", "1?noreport") in new stack
-- Goto (macro-dialout-trunk,s-CHANUNAVAIL,3)
-- Executing [s-CHANUNAVAIL@macro-dialout-trunk] NoOp("SIP/201-08648d50", "TRUNK Dial failed due to CHANUNAVAIL - failing through to other trunks") in new stack





-- Executing [s@macro-dialout-trunk] Dial("SIP/201-08648d50", "ZAP/3/03079707368|300|") in new stack
-- Requested transfer capability: 0x00 - SPEECH
-- Called 3/03079707368
-- Zap/3-1 is proceeding passing it to SIP/201-08648d50
-- Channel 0/3, span 1 got hangup request, cause 28
-- Hungup 'Zap/3-1'
== Everyone is busy/congested at this time (1:0/0/1)
-- Executing [s@macro-dialout-trunk] Goto("SIP/201-08648d50", "s-CHANUNAVAIL|1") in new stack


Hangupcause 28 means: -- Executing [s@macro-dialout-trunk] Dial("SIP/201-08648d50", "ZAP/3/03 -- Executing [s@macro-dialout-trunk] Dial("SIP/201-08648d50", "ZAP/3/03079707368|300|") in new stack
-- Requested transfer capability: 0x00 - SPEECH
-- Called 3/03079707368
-- Zap/3-1 is proceeding passing it to SIP/201-08648d50
-- Channel 0/3, span 1 got hangup request, cause 28
-- Hungup 'Zap/3-1'
== Everyone is busy/congested at this time (1:0/0/1)
-- Executing [s@macro-dialout-trunk] Goto("SIP/201-08648d50", "s-CHANUNAVAIL|1") in new stack

Here are some configurations of the server:
Asterisk 1.4.20-1

/etc/zaptel.conf
# Span 1: TE2/0/1 "T2XXP (PCI) Card 0 Span 1" (MASTER)
span=1,1,0,ccs,hdb3,crc4
# termtype: te
bchan=1-15,17-31
dchan=16

# Span 2: TE2/0/2 "T2XXP (PCI) Card 0 Span 2"
span=2,2,0,ccs,hdb3,crc4
# termtype: te
bchan=32-46,48-62
dchan=47

# Global data

loadzone = de


/etc/asterisk/zapata.conf
; Zapata telephony interface
;
; Configuration file

[trunkgroups]

[channels]

language=de
context=from-zaptel
;signalling=fxs_ks
signalling=pri_cpe
switchtype=euroisdn
pridialplan=national
rxwink=300 ; Atlas seems to use long (250ms) winks
;
; Whether or not to do distinctive ring detection on FXO lines
;
;usedistinctiveringdetection=yes

usecallerid=yes
hidecallerid=no
callwaiting=yes
usecallingpres=yes
callwaitingcallerid=yes
threewaycalling=yes
transfer=yes
cancallforward=yes
callreturn=yes
echocancel=yes
echocancelwhenbridged=no
;echotraining=800
rxgain=0.0
txgain=0.0
group=0
callgroup=1
pickupgroup=1
immediate=no

;faxdetect=both
faxdetect=incoming
;faxdetect=outgoing
;faxdetect=no

;Include genzaptelconf configs
#include zapata-auto.conf

;Include AMP configs
#include zapata_additional.conf



/etc/asterisk/zapata-auto.conf

; Span 1: TE2/0/1 "T2XXP (PCI) Card 0 Span 1" (MASTER)
group=0,11
language=de
context=from-zaptel
switchtype = euroisdn
signalling = pri_cpe
channel => 1-15,17-31
;group=
context=default

; Span 2: TE2/0/2 "T2XXP (PCI) Card 0 Span 2"
group=0,12
language=de
context=from-zaptel
switchtype = euroisdn
signalling = pri_cpe
channel => 32-46,48-62
;group=
context=default


zapata_additional.conf is empty


dmesg:
Zapata Telephony Interface Registered on major 196
Zaptel Version: 1.4.10.1
Found TE2XXP at base address fd000000, remapped to e0908000
TE2XXP version c01a0000, burst OFF
FALC version: 00000005, Board ID: 00


Zaptel Version: 1.4.10.1
Echo Canceller: OSLEC
Configuration
======================

SPAN 1: CCS/HDB3 Build-out: 0 db (CSU)/0-133 feet (DSX-1)
SPAN 2: CCS/HDB3 Build-out: 0 db (CSU)/0-133 feet (DSX-1)

Channel map:

Channel 01: Clear channel (Default) (Slaves: 01)
Channel 02: Clear channel (Default) (Slaves: 02)
Channel 03: Clear channel (Default) (Slaves: 03)
Channel 04: Clear channel (Default) (Slaves: 04)
Channel 05: Clear channel (Default) (Slaves: 05)
Channel 06: Clear channel (Default) (Slaves: 06)
Channel 07: Clear channel (Default) (Slaves: 07)
Channel 08: Clear channel (Default) (Slaves: 08)
Channel 09: Clear channel (Default) (Slaves: 09)
Channel 10: Clear channel (Default) (Slaves: 10)
Channel 11: Clear channel (Default) (Slaves: 11)
Channel 12: Clear channel (Default) (Slaves: 12)
Channel 13: Clear channel (Default) (Slaves: 13)
Channel 14: Clear channel (Default) (Slaves: 14)
Channel 15: Clear channel (Default) (Slaves: 15)
Channel 16: D-channel (Default) (Slaves: 16)
Channel 17: Clear channel (Default) (Slaves: 17)
Channel 18: Clear channel (Default) (Slaves: 18)
Channel 19: Clear channel (Default) (Slaves: 19)
Channel 20: Clear channel (Default) (Slaves: 20)
Channel 21: Clear channel (Default) (Slaves: 21)
Channel 22: Clear channel (Default) (Slaves: 22)
Channel 23: Clear channel (Default) (Slaves: 23)
Channel 24: Clear channel (Default) (Slaves: 24)
Channel 25: Clear channel (Default) (Slaves: 25)
Channel 26: Clear channel (Default) (Slaves: 26)
Channel 27: Clear channel (Default) (Slaves: 27)
Channel 28: Clear channel (Default) (Slaves: 28)
Channel 29: Clear channel (Default) (Slaves: 29)
Channel 30: Clear channel (Default) (Slaves: 30)
Channel 31: Clear channel (Default) (Slaves: 31)
Channel 32: Clear channel (Default) (Slaves: 32)
Channel 33: Clear channel (Default) (Slaves: 33)
Channel 34: Clear channel (Default) (Slaves: 34)
Channel 35: Clear channel (Default) (Slaves: 35)
Channel 36: Clear channel (Default) (Slaves: 36)
Channel 37: Clear channel (Default) (Slaves: 37)
Channel 38: Clear channel (Default) (Slaves: 38)
Channel 39: Clear channel (Default) (Slaves: 39)
Channel 40: Clear channel (Default) (Slaves: 40)
Channel 41: Clear channel (Default) (Slaves: 41)
Channel 42: Clear channel (Default) (Slaves: 42)
Channel 43: Clear channel (Default) (Slaves: 43)
Channel 44: Clear channel (Default) (Slaves: 44)
Channel 45: Clear channel (Default) (Slaves: 45)
Channel 46: Clear channel (Default) (Slaves: 46)
Channel 47: D-channel (Default) (Slaves: 47)
Channel 48: Clear channel (Default) (Slaves: 48)
Channel 49: Clear channel (Default) (Slaves: 49)
Channel 50: Clear channel (Default) (Slaves: 50)
Channel 51: Clear channel (Default) (Slaves: 51)
Channel 52: Clear channel (Default) (Slaves: 52)
Channel 53: Clear channel (Default) (Slaves: 53)
Channel 54: Clear channel (Default) (Slaves: 54)
Channel 55: Clear channel (Default) (Slaves: 55)
Channel 56: Clear channel (Default) (Slaves: 56)
Channel 57: Clear channel (Default) (Slaves: 57)
Channel 58: Clear channel (Default) (Slaves: 58)
Channel 59: Clear channel (Default) (Slaves: 59)
Channel 60: Clear channel (Default) (Slaves: 60)
Channel 61: Clear channel (Default) (Slaves: 61)
Channel 62: Clear channel (Default) (Slaves: 62)

62 channels to configure.


tkserver1*CLI> zap show channels
Chan Extension Context Language MOH Interpret
pseudo default de default
1 from-zaptel de default
2 from-zaptel de default
3 from-zaptel de default
4 from-zaptel de default
5 from-zaptel de default
6 from-zaptel de default
7 from-zaptel de default
8 from-zaptel de default
9 from-zaptel de default
10 from-zaptel de default
11 from-zaptel de default
12 from-zaptel de default
13 from-zaptel de default
14 from-zaptel de default
15 from-zaptel de default
17 from-zaptel de default
18 from-zaptel de default
19 from-zaptel de default
20 from-zaptel de default
21 from-zaptel de default
22 from-zaptel de default
23 from-zaptel de default
24 from-zaptel de default
25 from-zaptel de default
26 from-zaptel de default
27 from-zaptel de default
28 from-zaptel de default
29 from-zaptel de default
30 from-zaptel de default
31 from-zaptel de default
32 from-zaptel de default
33 from-zaptel de default
34 from-zaptel de default
35 from-zaptel de default
36 from-zaptel de default
37 from-zaptel de default
38 from-zaptel de default
39 from-zaptel de default
40 from-zaptel de default
41 from-zaptel de default
42 from-zaptel de default
43 from-zaptel de default
44 from-zaptel de default
45 from-zaptel de default
46 from-zaptel de default
48 from-zaptel de default
49 from-zaptel de default
50 from-zaptel de default
51 from-zaptel de default
52 from-zaptel de default
53 from-zaptel de default
54 from-zaptel de default
55 from-zaptel de default
56 from-zaptel de default
57 from-zaptel de default
58 from-zaptel de default
59 from-zaptel de default
60 from-zaptel de default
61 from-zaptel de default
62 from-zaptel de default

[tkserver1.local asterisk]# ztscan
[1]
active=yes
alarms=RED
description=T2XXP (PCI) Card 0 Span 1
name=TE2/0/1
manufacturer=Digium
devicetype=Wildcard TE210P
location=Board ID Switch 0
basechan=1
totchans=31
irq=145
type=digital-E1
syncsrc=0
lbo=0 db (CSU)/0-133 feet (DSX-1)
coding_opts=HDB3
framing_opts=CCS,CRC4
coding=HDB3
framing=CCS
[2]
active=yes
alarms=RED
description=T2XXP (PCI) Card 0 Span 2
name=TE2/0/2
manufacturer=Digium
devicetype=Wildcard TE210P
location=Board ID Switch 0
basechan=1
totchans=31
irq=145
type=digital-E1
syncsrc=0
lbo=0 db (CSU)/0-133 feet (DSX-1)
coding_opts=HDB3
framing_opts=CCS,CRC4
coding=HDB3
framing=CCS

The one light is green.

Does somebody know, why it does not work ?

best regards

Thorsten Jeschke

hello,
how about your pri status? is it up or down?
regards!
James.zhu

Dial("SIP/201-08648d50", "ZAP/3/03079707368|300|") in new stack
....
-- Channel 0/1, span 1 got hangup request, cause 28

the cause 28 is

"Destination address presented in an unrecognisable format or an incomplete destination address made the connection unable to be established."

and your number is 03079707368|300|

why have '|' in the number?

03079707368 is the telefonnumber. |300| is a default configuration of Trixbox and means the Timeout (Syntax Dial: Dial(Tech/Resource,Timeout,Optionen,URL) . It works fine on an other system.

hello,
please send a working ssh account to This email address is being protected from spambots. You need JavaScript enabled to view it. and add my google talk:[email protected]
regards!
James.zhu