- Thank you received: 0
×
Questions about D110/210/410 T1/E1/J1 PRI Cards
D410E Problem
12 years 4 months ago #7650
by Kvantum
Hi.
Have the strange problem with D410E.
Within 4 E1 channel works only one. Sometimes it span 1, sometimes it span 2...
Other channels make RELEASE with ISDN Cause 34.
Can you help with this problem?
chan_dahdi.conf
init.confmodulessystem.confcat /proc/interrupts
Have the strange problem with D410E.
Within 4 E1 channel works only one. Sometimes it span 1, sometimes it span 2...
Other channels make RELEASE with ISDN Cause 34.
Can you help with this problem?
chan_dahdi.conf
[channels]
language=ru
context=from-pstn
signalling=pri_cpe
switchtype=euroisdn
service_message_support=yes
pridialplan=unknown
prilocaldialplan=national
internationalprefix = 810
nationalprefix = 8
localprefix = 87292
;privateprefix = 87292525600
;unknownprefix =
;resetinterval = 3600
overlapdial=yes
group=0,11
context=from-pstn
signalling=pri_cpe
switchtype=euroisdn
channel => 1-15,17-31
context=default
group=0,12
context=from-pstn
signalling=pri_cpe
switchtype=euroisdn
channel => 32-46,48-62
context=default
group=0,13
context=from-pstn
signalling=pri_cpe
switchtype=euroisdn
channel => 63-77,79-93
context=default
group=0,14
context=from-pstn
signalling=pri_cpe
switchtype=euroisdn
channel => 94-108,110-124
context=default#
# Shell settings for Dahdi initialization scripts.
# This replaces the old/per-platform files (/etc/sysconfig/zaptel,
# /etc/defaults/zaptel)
#
# The maximal timeout (seconds) to wait for udevd to finish generating
# device nodes after the modules have loaded and before running dahdi_cfg.
#DAHDI_DEV_TIMEOUT=40
# A list of modules to unload when stopping.
# All of their dependencies will be unloaded as well.
#DAHDI_UNLOAD_MODULES="" # Disable module unloading
#DAHDI_UNLOAD_MODULES="dahdi echo" # If you use OSLEC
# Override settings for xpp_fxloader
#XPP_FIRMWARE_DIR=/usr/share/dahdi
#XPP_HOTPLUG_DISABLED=yes
#XPP_HOTPLUG_DAHDI=yes# Contains the list of modules to be loaded / unloaded by /etc/init.d/dahdi.
#
# NOTE: Please add/edit /etc/modprobe.d/dahdi or /etc/modprobe.conf if you
# would like to add any module parameters.
#
# Format of this file: list of modules, each in its own line.
# Anything after a '#' is ignore, likewise trailing and leading
# whitespaces and empty lines.
# Digium TE205P/TE207P/TE210P/TE212P: PCI dual-port T1/E1/J1
# Digium TE405P/TE407P/TE410P/TE412P: PCI quad-port T1/E1/J1
# Digium TE220: PCI-Express dual-port T1/E1/J1
# Digium TE420: PCI-Express quad-port T1/E1/J1
wct4xxp
# Digium TE120P: PCI single-port T1/E1/J1
# Digium TE121: PCI-Express single-port T1/E1/J1
# Digium TE122: PCI single-port T1/E1/J1
#wcte12xp
# Digium T100P: PCI single-port T1
# Digium E100P: PCI single-port E1
#wct1xxp
# Digium TE110P: PCI single-port T1/E1/J1
#wcte11xp
# Digium TDM2400P/AEX2400: up to 24 analog ports
# Digium TDM800P/AEX800: up to 8 analog ports
# Digium TDM410P/AEX410: up to 4 analog ports
#wctdm24xxp
# X100P - Single port FXO interface
# X101P - Single port FXO interface
#wcfxo
# Digium TDM400P: up to 4 analog ports
#wctdm
# Digium B410P: 4 NT/TE BRI ports
#wcb4xxp
# Digium TC400B: G729 / G723 Transcoding Engine
#wctc4xxp
# Xorcom Astribank Devices
#xpp_usb# Autogenerated by /usr/sbin/dahdi_genconf on Thu Dec 8 15:50:02 2011
# If you edit this file and execute /usr/sbin/dahdi_genconf again,
# your manual changes will be LOST.
# Dahdi Configuration File
#
# This file is parsed by the Dahdi Configurator, dahdi_cfg
#
# Span 1: TE4/0/1 "T4XXP (PCI) Card 0 Span 1" (MASTER) HDB3/CCS ClockSource
span=1,1,0,ccs,hdb3
# termtype: te
bchan=1-15,17-31
dchan=16
echocanceller=mg2,1-15,17-31
# Span 2: TE4/0/2 "T4XXP (PCI) Card 0 Span 2" HDB3/CCS
span=2,2,0,ccs,hdb3
# termtype: te
bchan=32-46,48-62
dchan=47
echocanceller=mg2,32-46,48-62
# Span 3: TE4/0/3 "T4XXP (PCI) Card 0 Span 3" HDB3/CCS
span=3,3,0,ccs,hdb3
# termtype: te
bchan=63-77,79-93
dchan=78
echocanceller=mg2,63-77,79-93
# Span 4: TE4/0/4 "T4XXP (PCI) Card 0 Span 4" HDB3/CCS
span=4,4,0,ccs,hdb3
# termtype: te
bchan=94-108,110-124
dchan=109
echocanceller=mg2,94-108,110-124
# Global data
loadzone = ru
defaultzone = ruCPU0 CPU1 CPU2 CPU3 CPU4 CPU5 CPU6 CPU7
0: 631660 0 0 0 0 0 0 0 IO-APIC-edge timer
1: 3 0 0 0 0 0 0 0 IO-APIC-edge i8042
8: 1 0 0 0 0 0 0 0 IO-APIC-edge rtc
9: 0 0 0 0 0 0 0 0 IO-APIC-level acpi
12: 4 0 0 0 0 0 0 0 IO-APIC-edge i8042
51: 89 0 0 0 0 0 0 3 PCI-MSI-X eth0-5
59: 0 0 0 0 0 0 0 0 PCI-MSI-X eth0-6
67: 0 0 0 0 0 0 0 0 PCI-MSI-X eth0-7
75: 1 0 0 0 0 0 0 0 PCI-MSI-X cnic
83: 63 0 0 0 0 0 854 1063 PCI-MSI-X eth3-0
91: 8 0 0 0 0 0 0 0 PCI-MSI-X eth3-1
98: 0 0 0 0 0 0 0 0 IO-APIC-level ehci_hcd:usb1, uhci_hcd:usb2
99: 0 0 0 0 0 0 0 0 PCI-MSI-X eth3-2
106: 0 0 0 0 0 0 0 0 IO-APIC-level uhci_hcd:usb3, uhci_hcd:usb5
107: 0 0 0 0 0 0 0 0 PCI-MSI-X eth3-3
114: 0 0 0 0 0 0 0 0 IO-APIC-level uhci_hcd:usb4
115: 0 0 0 0 0 0 0 0 PCI-MSI-X eth3-4
122: 33 3 0 0 0 0 0 0 IO-APIC-level uhci_hcd:usb6, ata_piix, hpilo
123: 23 11 0 0 0 36 0 0 PCI-MSI-X eth3-5
131: 17 0 0 0 0 0 0 0 PCI-MSI-X eth3-6
138: 2567 0 1946 0 0 0 0 0 PCI-MSI-X cciss0
139: 21 0 1 0 0 6 3 0 PCI-MSI-X eth3-7
147: 1 0 0 0 0 0 0 0 PCI-MSI-X cnic
169: 160766 0 0 0 0 353873 0 0 IO-APIC-level wct4xxp
202: 21 190 0 0 0 0 3 0 PCI-MSI-X eth0-0
210: 1 0 0 0 0 0 0 0 PCI-MSI-X eth0-1
218: 0 0 0 0 0 0 0 0 PCI-MSI-X eth0-2
226: 1 0 0 0 0 0 0 0 PCI-MSI-X eth0-3
234: 1 0 0 0 0 0 0 0 PCI-MSI-X eth0-4
NMI: 674 111 111 108 134 120 107 105
LOC: 631616 631555 631482 631412 631330 631252 631176 631108
ERR: 0
MIS: 0
Time to create page: 0.035 seconds