DE410P : mixed configuration

Hello,
is it possible to configure every port of this board independently?
My need is to configure one port of the DE410P with an ericsson pbx and use the other 3 as incoming/outgoing trunks with the public network.
Using Asterisk.

Regards,
Massimo

Each DIP switch controls one span configuration for E1 or T1 mode. Setting DIP1 to ON means SPAN1 will be E1.Setting DIP1 to OFF means SPAN1 will be T1.
You can also configure the signalling as pri_cpe or pri_net for each port to be used as Network side or CPE side.

i] Last edited by tim.june at 2012-6-26 10:52 [/i

many thanks tim.
Sorry for the dumb question.