×
Notice
The forum is in read only mode.
Forum
Telephony Cards Support
D110/210/410 Series
Noise/Static on the line
×
Questions about D110/210/410 T1/E1/J1 PRI Cards
Noise/Static on the line
11 years 2 months ago #8587
by mordzy
Hi, I have a D-110E card that is runnung on my elastix server (new install). when calling out or in the caller on the remote phone (cell/mobile/landline) can here constant noise or static.
Elastics seems to have detected the card as a Digium Te110p for some reason. while it does function i just have this noise.
my /etc/dahdi/system.conf file is below
# Span 1: WCT1/0 "Digium Wildcard TE110P T1/E1 Card 0" (MASTER)
span=1,1,0,ccs,hdb3,crc4
# termtype: te
bchan=1-15,17-31
dchan=16
echocanceller=oslec,1-15,17-31
# Global data
loadzone
= uk
defaultzone
= uk
/etc/asterisk/chan_dahdi.conf is;
[trunkgroups]
loadzone=uk
defaultzone=uk
usecallerid=yes
ukcallerid=yes
cidsignalling=v23 ; Added for UK CLI detection
cidstart=polarity ; Added for UK CLI detection
sendcalleridafter=2
callerid=asreceived ; propagate the CID received from BT.
[channels]
context=from-pstn
signalling=pri_cpe
switchtype=euroisdn
rxwink=300
; Atlas seems to use long (250ms) winks
usecallerid=yes
hidecallerid=no
callwaiting=yes
usecallingpres=yes
callwaitingcallerid=yes
threewaycalling=yes
transfer=yes
canpark=yes
cancallforward=yes
callreturn=yes
echocancel=yes
echocancelwhenbridged=no
faxdetect=incoming
echotraining=800
rxgain=0.0
txgain=0.0
callgroup=1
pickupgroup=1
;Uncomment these lines if you have problems with the disconection of your analog lines
;busydetect=yes
;busycount=3
immediate=no
#include dahdi-channels.conf
#include chan_dahdi_additional.conf
Thanks for your help in advance
Less
More
Posts: 26
Thank you received: 4
11 years 2 months ago #8588
by chunlei.yi
hi,pls disable the crc4 and oslec as the following shows then restart dahdi and asterisk to try, if still have problem, contact me via msn or skype
span=1,1,0,ccs,hdb3
# termtype: te
bchan=1-15,17-31
dchan=16
#echocanceller=oslec,1-15,17-31
# Global data
loadzone = uk
defaultzone = uk
msn: This email address is being protected from spambots. You need JavaScript enabled to view it.
skype:chunlei.yi
11 years 2 months ago #8589
by mordzy
thanks Chunlei, Ill try this and report back. maybe a few hours as i need down time to remove the current running system to test.
Thanks
11 years 2 months ago #8590
by mordzy
tried your suggestion and get same problem. have added you on skype.
Less
More
Posts: 26
Thank you received: 4
11 years 2 months ago #8594
by chunlei.yi
ok,pls contact me when you are online. i will help you to check it remotely
Forum
Telephony Cards Support
D110/210/410 Series
Noise/Static on the line
Time to create page: 0.034 seconds