×
Notice
The forum is in read only mode.
Forum
End of Life Products Support
D115 Series
error message?
×
Questions about D-110P 1 Span E1/T1/J1 Interface Card
error message?
16 years 3 days ago #941
by luoye
After the D110P card keep run for 2 days, the system print out the error log message:
" Write to 43 failed: unknow error 500" ,then all channels are disconnected.
can you tell me this is a hardware problem or driver problem or system problem?
I should how to handle the problem, thank you in advance.
Regards.
luoye.
16 years 3 days ago #942
by james.zhu
hello, luoye:
please show us your:
1) your zaptel and zapata.conf
2) cat your IRQ
3) hardware specs.
4) make sure it is D110P or D110PG
5) make sure telcom PRI is connecting
regards!
James.zhu
16 years 3 days ago #943
by luoye
our configuration is:
1, zaptel.conf:
span=1,1,0,ccs,hdb3,crc4
bchan=1-15,17-31
dchan=16
loadzone = us
defaultzone = us
zapata.conf:
; Zapata telephony interface
;
; Configuration file
[trunkgroups]
[channels]
language=en
context=from-pstn
signalling=fxs_ks
rxwink=300 ; Atlas seems to use long (250ms) winks
;
; Whether or not to do distinctive ring detection on FXO lines
;
;usedistinctiveringdetection=yes
usecallerid=yes
hidecallerid=no
callwaiting=yes
usecallingpres=yes
callwaitingcallerid=yes
threewaycalling=yes
transfer=yes
cancallforward=yes
callreturn=yes
echocancel=yes
echocancelwhenbridged=no
echotraining=800
rxgain=0.0
txgain=0.0
group=0
callgroup=1
pickupgroup=1
immediate=no
busydetect=yes
busycount=4
busypattern=500,500,100
callprogress=yes
progzone=cn
faxdetect=both
faxdetect=incoming
faxdetect=outgoing
;faxdetect=no
;Include genzaptelconf configs
#include zapata-auto.conf
signalling=pri_net
;signalling=pri_cpe
switchtype=national
context=from-span-115
group=1
;channel => 1-23
channel => 1-15
channel => 17-31
;Include AMP configs
#include zapata_additional.conf
"zapata.conf" [dos] 65L, 1036C
2, [root@asterisk1 asterisk]# cat /proc/interrupts
CPU0
0: 147548184 XT-PIC timer
1: 429 XT-PIC i8042
2: 0 XT-PIC cascade
5: 27662550 XT-PIC uhci_hcd
8: 1 XT-PIC rtc
9: 3 XT-PIC acpi, ehci_hcd
11: 9170553 XT-PIC Intel 82801DB-ICH4, eth0, uhci_hcd
12: 147342372 XT-PIC uhci_hcd, wcte11xp
14: 109494 XT-PIC ide0
NMI: 0
3, Two D110PG card in different PBX service connect mutual by a twisted-pair cable.
4, the card is D110PG.
5, PRI is connecting normally.
help me, thank you.
regards.
16 years 3 days ago #944
by luoye
Hi, James.zhu
please help me!
I always expect your reply.
Really I don't know what happen.
Regards.
16 years 3 days ago #945
by miaolin
Could you send your ssh to This email address is being protected from spambots. You need JavaScript enabled to view it. ?
Forum
End of Life Products Support
D115 Series
error message?
Time to create page: 0.035 seconds