D110P - RED Alarm

Hi guys,

That's my first time configuring a D110P and I'm having a hard time.

I've to configure a D110P with support to R2. I'm using the OpenR2 library.

My server is:

Ubuntu Server 8.04
Linux BRSVPABX 2.6.24-19-server #1 SMP Wed Jun 18 15:18:00 UTC 2008 i686 GNU/Linux

Attached is my DMESG.

=============================================

# lspci
00:00.0 Host bridge: Intel Corporation 82865G/PE/P DRAM Controller/Host-Hub Interface (rev 02)
00:02.0 VGA compatible controller: Intel Corporation 82865G Integrated Graphics Controller (rev 02)
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev c2)
00:1f.0 ISA bridge: Intel Corporation 82801EB/ER (ICH5/ICH5R) LPC Interface Bridge (rev 02)
00:1f.1 IDE interface: Intel Corporation 82801EB/ER (ICH5/ICH5R) IDE Controller (rev 02)
00:1f.2 IDE interface: Intel Corporation 82801EB (ICH5) SATA Controller (rev 02)
00:1f.3 SMBus: Intel Corporation 82801EB/ER (ICH5/ICH5R) SMBus Controller (rev 02)
01:07.0 Network controller: Tiger Jet Network Inc. Tiger3XX Modem/ISDN interface
01:08.0 Ethernet controller: MYSON Technology Inc SURECOM EP-320X-S 100/10M Ethernet PCI Adapter

=============================================

# ztcfg -vvvvvvvvvvvv

Zaptel Version: 1.4.11
Echo Canceller: MG2
Configuration
======================

SPAN 1: CAS/HDB3 Build-out: 0 db (CSU)/0-133 feet (DSX-1)

Channel map:

Channel 01: CAS / User (Default) (Slaves: 01)
Channel 02: CAS / User (Default) (Slaves: 02)
Channel 03: CAS / User (Default) (Slaves: 03)
Channel 04: CAS / User (Default) (Slaves: 04)
Channel 05: CAS / User (Default) (Slaves: 05)
Channel 06: CAS / User (Default) (Slaves: 06)
Channel 07: CAS / User (Default) (Slaves: 07)
Channel 08: CAS / User (Default) (Slaves: 08)
Channel 09: CAS / User (Default) (Slaves: 09)
Channel 10: CAS / User (Default) (Slaves: 10)
Channel 11: CAS / User (Default) (Slaves: 11)
Channel 12: CAS / User (Default) (Slaves: 12)
Channel 13: CAS / User (Default) (Slaves: 13)
Channel 14: CAS / User (Default) (Slaves: 14)
Channel 15: CAS / User (Default) (Slaves: 15)
Channel 16: D-channel (Default) (Slaves: 16)
Channel 17: CAS / User (Default) (Slaves: 17)
Channel 18: CAS / User (Default) (Slaves: 18)
Channel 19: CAS / User (Default) (Slaves: 19)
Channel 20: CAS / User (Default) (Slaves: 20)
Channel 21: CAS / User (Default) (Slaves: 21)
Channel 22: CAS / User (Default) (Slaves: 22)
Channel 23: CAS / User (Default) (Slaves: 23)
Channel 24: CAS / User (Default) (Slaves: 24)
Channel 25: CAS / User (Default) (Slaves: 25)
Channel 26: CAS / User (Default) (Slaves: 26)
Channel 27: CAS / User (Default) (Slaves: 27)
Channel 28: CAS / User (Default) (Slaves: 28)
Channel 29: CAS / User (Default) (Slaves: 29)
Channel 30: CAS / User (Default) (Slaves: 30)
Channel 31: CAS / User (Default) (Slaves: 31)

31 channels to configure.

=============================================

# cat /proc/interrupts
CPU0
0: 91 IO-APIC-edge timer
1: 8 IO-APIC-edge i8042
6: 3 IO-APIC-edge floppy
7: 0 IO-APIC-edge parport0
8: 7 IO-APIC-edge rtc
9: 0 IO-APIC-fasteoi acpi
14: 5872 IO-APIC-edge libata
15: 101 IO-APIC-edge libata
16: 245756 IO-APIC-fasteoi eth1
17: 0 IO-APIC-fasteoi libata
18: 91342230 IO-APIC-fasteoi wcte11xp
NMI: 0 Non-maskable interrupts
LOC: 376921 Local timer interrupts
RES: 0 Rescheduling interrupts
CAL: 0 function call interrupts
TLB: 0 TLB shootdowns
TRM: 0 Thermal event interrupts
SPU: 0 Spurious interrupts
ERR: 0
MIS: 0

=============================================

# lsmod
Module Size Used by
ipv6 272804 12
wct1xxp 16160 0
iptable_filter 3840 0
ip_tables 14820 1 iptable_filter
x_tables 16132 1 ip_tables
lp 12324 0
loop 19076 0
hisax 501760 0
isdn 139232 1 hisax
slhc 7040 1 isdn
wcte11xp 28704 0
zaptel 199812 2 wct1xxp,wcte11xp
crc_ccitt 3072 2 hisax,zaptel
button 9232 0
iTCO_wdt 13092 0
iTCO_vendor_support 4868 1 iTCO_wdt
intel_agp 25620 1
shpchp 34452 0
pci_hotplug 30880 1 shpchp
parport_pc 36644 1
parport 37704 2 lp,parport_pc
agpgart 34760 1 intel_agp
evdev 12928 0
dcdbas 9508 0
pcspkr 4224 0
ext3 136584 8
jbd 48404 1 ext3
mbcache 9600 1 ext3
sg 36496 0
sr_mod 17828 0
cdrom 37280 1 sr_mod
sd_mod 30720 10
pata_acpi 8320 0
ata_generic 8324 0
floppy 59332 0
ata_piix 19588 9
libata 159344 3 pata_acpi,ata_generic,ata_piix
scsi_mod 151180 4 sg,sr_mod,sd_mod,libata
fealnx 21384 0
mii 6400 1 fealnx
thermal 16796 0
processor 37000 1 thermal
fan 5636 0
fbcon 42656 0
tileblit 3456 1 fbcon
font 9472 1 fbcon
bitblit 6784 1 fbcon
softcursor 3072 1 bitblit
fuse 50580 1

=============================================

# cat zaptel.conf
loadzone = br
defaultzone =br

span=1,1,0,cas,hdb3
cas=1-15:1101
cas=17-31:1101
dchan=16

=============================================

# cat zapata.conf
[trunkgroups]

[channels]
usecallerid=yes
callwaiting=yes
usecallingpres=yes
callwaitingcallerid=yes
threewaycalling=yes
transfer=yes
canpark=yes
cancallforward=yes
callreturn=yes
echocancel=yes
echocancelwhenbridged=yes

signalling=mfcr2
mfcr2_variant=br
mfcr2_get_ani_first=no
mfcr2_max_ani=20
mfcr2_max_dnis=4
mfcr2_category=national_subscriber
mfcr2_logdir=span1
mfcr2_logging=all

context=in-e1
group=0
callgroup=0
pickupgroup=0
channel => 1-15
channel => 17-31

=============================================

ANY help will be very appreciated!! =)

Thank you very much!

hello:
i am not quite sure the problem with r2, you can try later version of trixbox. that supports R2. please check with this:
www.trixbox.org/devblog/r2-support-now-available-trixbox-ce
trixbox.org/wiki/setting-support-r2
regards!
James.zhu

Hi
Could you tell me what problem you meet?
BTW , Is the OpenR2 libary which you used libmfc2?

Br

Wang Xiang

tdurante wrote: Hi guys,

That's my first time configuring a D110P and I'm having a hard time.

I've to configure a D110P with support to R2. I'm using the OpenR2 library.

My server is:

Ubuntu Server 8.04
Linux BRSVPABX 2.6.24-19-server #1 SMP Wed Jun 18 15:18:00 UTC 2008 i686 GNU/Linux

Attached is my DMESG.

=============================================

# lspci
00:00.0 Host bridge: Intel Corporation 82865G/PE/P DRAM Controller/Host-Hub Interface (rev 02)
00:02.0 VGA compatible controller: Intel Corporation 82865G Integrated Graphics Controller (rev 02)
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev c2)
00:1f.0 ISA bridge: Intel Corporation 82801EB/ER (ICH5/ICH5R) LPC Interface Bridge (rev 02)
00:1f.1 IDE interface: Intel Corporation 82801EB/ER (ICH5/ICH5R) IDE Controller (rev 02)
00:1f.2 IDE interface: Intel Corporation 82801EB (ICH5) SATA Controller (rev 02)
00:1f.3 SMBus: Intel Corporation 82801EB/ER (ICH5/ICH5R) SMBus Controller (rev 02)
01:07.0 Network controller: Tiger Jet Network Inc. Tiger3XX Modem/ISDN interface
01:08.0 Ethernet controller: MYSON Technology Inc SURECOM EP-320X-S 100/10M Ethernet PCI Adapter

=============================================

# ztcfg -vvvvvvvvvvvv

Zaptel Version: 1.4.11
Echo Canceller: MG2
Configuration
======================

SPAN 1: CAS/HDB3 Build-out: 0 db (CSU)/0-133 feet (DSX-1)

Channel map:

Channel 01: CAS / User (Default) (Slaves: 01)
Channel 02: CAS / User (Default) (Slaves: 02)
Channel 03: CAS / User (Default) (Slaves: 03)
Channel 04: CAS / User (Default) (Slaves: 04)
Channel 05: CAS / User (Default) (Slaves: 05)
Channel 06: CAS / User (Default) (Slaves: 06)
Channel 07: CAS / User (Default) (Slaves: 07)
Channel 08: CAS / User (Default) (Slaves: 08)
Channel 09: CAS / User (Default) (Slaves: 09)
Channel 10: CAS / User (Default) (Slaves: 10)
Channel 11: CAS / User (Default) (Slaves: 11)
Channel 12: CAS / User (Default) (Slaves: 12)
Channel 13: CAS / User (Default) (Slaves: 13)
Channel 14: CAS / User (Default) (Slaves: 14)
Channel 15: CAS / User (Default) (Slaves: 15)
Channel 16: D-channel (Default) (Slaves: 16)
Channel 17: CAS / User (Default) (Slaves: 17)
Channel 18: CAS / User (Default) (Slaves: 18)
Channel 19: CAS / User (Default) (Slaves: 19)
Channel 20: CAS / User (Default) (Slaves: 20)
Channel 21: CAS / User (Default) (Slaves: 21)
Channel 22: CAS / User (Default) (Slaves: 22)
Channel 23: CAS / User (Default) (Slaves: 23)
Channel 24: CAS / User (Default) (Slaves: 24)
Channel 25: CAS / User (Default) (Slaves: 25)
Channel 26: CAS / User (Default) (Slaves: 26)
Channel 27: CAS / User (Default) (Slaves: 27)
Channel 28: CAS / User (Default) (Slaves: 28)
Channel 29: CAS / User (Default) (Slaves: 29)
Channel 30: CAS / User (Default) (Slaves: 30)
Channel 31: CAS / User (Default) (Slaves: 31)

31 channels to configure.

=============================================

# cat /proc/interrupts
CPU0
0: 91 IO-APIC-edge timer
1: 8 IO-APIC-edge i8042
6: 3 IO-APIC-edge floppy
7: 0 IO-APIC-edge parport0
8: 7 IO-APIC-edge rtc
9: 0 IO-APIC-fasteoi acpi
14: 5872 IO-APIC-edge libata
15: 101 IO-APIC-edge libata
16: 245756 IO-APIC-fasteoi eth1
17: 0 IO-APIC-fasteoi libata
18: 91342230 IO-APIC-fasteoi wcte11xp
NMI: 0 Non-maskable interrupts
LOC: 376921 Local timer interrupts
RES: 0 Rescheduling interrupts
CAL: 0 function call interrupts
TLB: 0 TLB shootdowns
TRM: 0 Thermal event interrupts
SPU: 0 Spurious interrupts
ERR: 0
MIS: 0

=============================================

# lsmod
Module Size Used by
ipv6 272804 12
wct1xxp 16160 0
iptable_filter 3840 0
ip_tables 14820 1 iptable_filter
x_tables 16132 1 ip_tables
lp 12324 0
loop 19076 0
hisax 501760 0
isdn 139232 1 hisax
slhc 7040 1 isdn
wcte11xp 28704 0
zaptel 199812 2 wct1xxp,wcte11xp
crc_ccitt 3072 2 hisax,zaptel
button 9232 0
iTCO_wdt 13092 0
iTCO_vendor_support 4868 1 iTCO_wdt
intel_agp 25620 1
shpchp 34452 0
pci_hotplug 30880 1 shpchp
parport_pc 36644 1
parport 37704 2 lp,parport_pc
agpgart 34760 1 intel_agp
evdev 12928 0
dcdbas 9508 0
pcspkr 4224 0
ext3 136584 8
jbd 48404 1 ext3
mbcache 9600 1 ext3
sg 36496 0
sr_mod 17828 0
cdrom 37280 1 sr_mod
sd_mod 30720 10
pata_acpi 8320 0
ata_generic 8324 0
floppy 59332 0
ata_piix 19588 9
libata 159344 3 pata_acpi,ata_generic,ata_piix
scsi_mod 151180 4 sg,sr_mod,sd_mod,libata
fealnx 21384 0
mii 6400 1 fealnx
thermal 16796 0
processor 37000 1 thermal
fan 5636 0
fbcon 42656 0
tileblit 3456 1 fbcon
font 9472 1 fbcon
bitblit 6784 1 fbcon
softcursor 3072 1 bitblit
fuse 50580 1

=============================================

# cat zaptel.conf
loadzone = br
defaultzone =br

span=1,1,0,cas,hdb3
cas=1-15:1101
cas=17-31:1101
dchan=16

=============================================

# cat zapata.conf
[trunkgroups]

[channels]
usecallerid=yes
callwaiting=yes
usecallingpres=yes
callwaitingcallerid=yes
threewaycalling=yes
transfer=yes
canpark=yes
cancallforward=yes
callreturn=yes
echocancel=yes
echocancelwhenbridged=yes

signalling=mfcr2
mfcr2_variant=br
mfcr2_get_ani_first=no
mfcr2_max_ani=20
mfcr2_max_dnis=4
mfcr2_category=national_subscriber
mfcr2_logdir=span1
mfcr2_logging=all

context=in-e1
group=0
callgroup=0
pickupgroup=0
channel => 1-15
channel => 17-31

=============================================

ANY help will be very appreciated!! =)

Thank you very much!

Hi,

Sorry for taking long to reply.

I'm using the libopenr2 ( libopenr2.org/ ).

But the strange is that I got the alarm in the card even before connecting any link. The compilation of OpenR2 is within the Asterisk not the card.

I compile the card normally, using zaptel 1.4.11 and the D110P patch download from your site.

When I do ztscan I get:

# ztscan
[1]
active=yes
alarms=RED
description=Digium Wildcard TE110P T1/E1 Card 0
name=WCT1/0
manufacturer=Digium
devicetype=Digium Wildcard TE110P T1/E1
location=PCI Bus 04 Slot 02
basechan=1
totchans=31
irq=17
type=digital-E1
syncsrc=0
lbo=0 db (CSU)/0-133 feet (DSX-1)
coding_opts=HDB3
framing_opts=CCS,CRC4
coding=HDB3
framing=

I don't know what is going on, it this configuration worked once, then stop working.

Now I'm no longer with the Ubuntu, I changed to Slackware just to be sure that it wasn't a OS thing.

My OS now:
Slackware 12.1
Linux brsvasterisk 2.6.24.5-smp #2 SMP Wed Apr 30 13:41:38 CDT 2008 i686 Intel(R) Pentium(R) 4 CPU 2.80GHz GenuineIntel GNU/Linux

Interrupts still the same, DMESG is attached.

Thanks!