ATT ISSUE D110p

Well, we have an issue with ATT were not able to port one our clientsto T1 line due to the PRI card not being compatible with them.

Here is what they wanted
* T1 channel associated signaling or 5ESS PRI signaling with NFAS
* Wink Signaling
* Bipolar with eight zero substitution (B8zs)
* Enhanced Super Frame (EFS) framing

the pri card D110p has been configured and working correctly ( No alarm)

Here is /etc/zapta.config
# Span 1: WCT1/0 "Digium Wildcard TE110P T1/E1 Card 0" (MASTER) B8ZS/ESF
span=1,1,0,esf,b8zs
# termtype: te
bchan=1-23
dchan=24

# Global data

loadzone = us
defaultzone = us

and here is /etc/asterisk/zapata.config
;
; Zapata telephony interface
;
; Configuration file

[trunkgroups]

[channels]

language=en
context=from-zaptel
signalling=fxs_ks
rxwink=300 ; Atlas seems to use long (250ms) winks
;
; Whether or not to do distinctive ring detection on FXO lines
;
;usedistinctiveringdetection=yes

usecallerid=yes
hidecallerid=no
callwaiting=yes
usecallingpres=yes
callwaitingcallerid=yes
threewaycalling=yes
transfer=yes
cancallforward=yes
callreturn=yes
echocancel=yes
echocancelwhenbridged=no
echotraining=800
rxgain=0.0
txgain=0.0
group=0
callgroup=1
pickupgroup=1
immediate=no

;faxdetect=both
faxdetect=incoming
;faxdetect=outgoing
;faxdetect=no

;Include genzaptelconf configs
#include zapata-auto.conf



;Include AMP configs
#include zapata_additional.conf


#include zapata-channels.conf

their concern was we are sending correct signals through channel 24

any help to solve it will appreciated.

hello,
if you concern channel 24, you must give me the information about channel 24, where is the information of channel 24 ? where is the switchtype and signalling, you should set that based on the requirement the provider gave.
please check this link for setting the card infor:
http://www.voip-info.org/wiki/index.php?page=Asterisk+config+zapata.conf.sample
regards!
James.zhu