HI!
I just bought a GW1200. I have successfully connected it to my sip phones either directly or via a freeswitch. The problem I have is that a noise reduction circuit seems to be active in the call. This makes it hard for an IVR system with speech recognition to work properly. Is there a way to disable the noise reduction. I'm using G711 from the GW1200 towards my freeswitch and IVR. I have tried to change the RX/TX gains to 0 but with not much luck.
Hi,We faced this issue before, what we did is to adjust RX/TX in GSM settings, you can refer following pic:
[attach]295[/attach]
Change Rx Gain from 10 to 0, and have a try.
if not work, contact me via Skype: tim.jjune.
Email: This email address is being protected from spambots. You need JavaScript enabled to view it.
Email: This email address is being protected from spambots. You need JavaScript enabled to view it.
Skype: tim.jjune