G400P and TDM410P

Hi;
I have just found out that the EXTRA application is not working;

[from-internal]


exten => 1,1,Dial(EXTRA/1/0933XXXXXXX)
exten => 1.n.Hangup()


im using Dahdi/1/(from a400P) on this dial plan, when i Dialled 1 , call will be routed on my cellphone number. I basically working on two sims. one on the server and 1 on my cellphone

and i have this error: (0933XXXXXXX is my cellphone number)
=========================================================
Executing [1@from-internal:1] Dial("DAHDI/1-1", "EXTRA/1/09XXXXXXXXX") in new stack
[Aug 1 21:50:25] WARNING[4190]: app_dial.c:2039 dial_exec_full: Unable to create channel of type 'EXTRA' (cause 0 - Unknown)
== Everyone is busy/congested at this time (1:0/0/1)
-- Auto fallthrough, channel 'DAHDI/1-1' status is 'CHANUNAVAIL'
-- Hanging up on 'DAHDI/1-1'


==============================================================

the asterisk box can receive incoming calls but I cant get it to dial out from gsm. The sim card is working as I tried to call someones number earlier. any ideas?

hi,
Because you have two cards now, could you please check the channel definition? Which card is firstly initialized?

According to your info, this is configuration issue.

under /etc/dahdi/system.conf===============================================================
# Span 1: WCTDM/4 "Wildcard TDM400P REV E/F Board 5" (MASTER)
fxoks=1
echocanceller=mg2,1
fxoks=2
echocanceller=mg2,2
fxsks=3
echocanceller=mg2,3
fxsks=4
echocanceller=mg2,4

# Span 2: opvxg4xx/0/1 "OpenVox G400P GSM/CDMA PCI Card 0" AMI/CCS
span=2,1,0,ccs,ami
# termtype: gsm
bchan=5
hardhdlc=6
echocanceller=mg2,5

# Global data

loadzone = us
defaultzone = us

====================================================================


i assumes that the a400P is the first to initialize , when I call the GSM number. it says:


Having this said: It means that it will go to the second channel equivalent to G400P which is EXTRA/3 .

I will have my dial plan modified and inform you after. Thanks

Hi;
the channel was on EXTRA/5 and not EXTRA/1 . I Don't know why but it works..