- Thank you received: 0
keywords: ip pbx voip gateway gsm gateway
Loading DAHDI hardware modules:
wct4xxp: [ OK ]
wcte12xp: [ OK ]
wct1xxp: [ OK ]
wcte11xp: [ OK ]
wctdm24xxp: [ OK ]
wcfxo: [ OK ]
wctdm: [ OK ]
wcb4xxp: [ OK ]
wctc4xxp: [ OK ]
xpp_usb: [ OK ]
opvxg4xx: [ OK ]
Running dahdi_cfg: DAHDI_SPANCONFIG failed on span 1: Invalid argument (22)
[FAILED]
*CLI> gsm show spans
GSM span 1: Provisioned, Down, Active
GSM span 2: Provisioned, Down, Active
GSM span 3: Provisioned, Down, Active
GSM span 4: Provisioned, Down, Active
# Autogenerated by /usr/sbin/dahdi_genconf on Wed Jul 6 14:36:30 2011
# If you edit this file and execute /usr/sbin/dahdi_genconf again,
# your manual changes will be LOST.
# Dahdi Configuration File
#
# This file is parsed by the Dahdi Configurator, dahdi_cfg
#
# Span 1: opvxg4xx/0/1 "OpenVox G400P GSM/CDMA PCI Card 0" (MASTER)
span=1,1,0,ccs,ami
# termtype: gsm
bchan=1
hardhdlc=2
echocanceller=mg2,1
# Span 2: opvxg4xx/0/2 "OpenVox G400P GSM/CDMA PCI Card 0"
span=2,2,0,ccs,ami
# termtype: gsm
bchan=3
hardhdlc=4
echocanceller=mg2,3
# Span 3: opvxg4xx/0/3 "OpenVox G400P GSM/CDMA PCI Card 0"
span=3,3,0,ccs,ami
# termtype: gsm
bchan=5
hardhdlc=6
echocanceller=mg2,5
# Span 4: opvxg4xx/0/4 "OpenVox G400P GSM/CDMA PCI Card 0"
span=4,4,0,ccs,ami
# termtype: gsm
bchan=7
hardhdlc=8
echocanceller=mg2,7
# Span 5: WCTDM/4 "Wildcard TDM400P REV E/F Board 5"
fxsks=9
echocanceller=mg2,9
fxsks=10
echocanceller=mg2,10
# channel 11, WCTDM/4/2, no module.
# channel 12, WCTDM/4/3, no module.
# Global data
loadzone = pt
defaultzone = pt
dahdi: Telephony Interface Registered on major 196
dahdi: Version: 2.4.1.2
PCI: Enabling device 0000:04:01.0 (0000 -> 0002)
ACPI: PCI Interrupt 0000:04:01.0[A] -> GSI 16 (level, low) -> IRQ 169
Found an OpenVox G400P: Version 1.0
opvxg4xx: slot 0 is Installed
opvxg4xx: slot 1 is Installed
opvxg4xx: slot 2 is Installed
opvxg4xx: slot 3 is Installed
opvxg4xx: Powering up all spans...
Freshmaker version: 71
Freshmaker passed register test
Module 0: Installed -- AUTO FXO (PORTUGAL mode)
Module 1: Installed -- AUTO FXO (PORTUGAL mode)
Module 2: Not installed
Module 3: Not installed
Found a Wildcard TDM: Wildcard TDM400P REV E/F (2 modules)
dahdi_transcode: Loaded.
INFO-xpp: revision Unknown MAX_XPDS=64 (8*8)
INFO-xpp: FEATURE: without BRISTUFF support
INFO-xpp: FEATURE: with PROTOCOL_DEBUG
INFO-xpp: FEATURE: with sync_tick() from DAHDI
INFO-xpp_usb: revision Unknown
usbcore: registered new driver xpp_usb
dahdi: Registered tone zone 0 (United States / North America)
dahdi_echocan_mg2: Registered echo canceler 'MG2'
dahdi: Registered tone zone 25 (Portugal)
usbcore: deregistering driver xpp_usb
Loading DAHDI hardware modules:
wct4xxp: [ OK ]
wcte12xp: [ OK ]
wct1xxp: [ OK ]
wcte11xp: [ OK ]
wctdm24xxp: [ OK ]
wcfxo: [ OK ]
wctdm: [ OK ]
wcb4xxp: [ OK ]
wctc4xxp: [ OK ]
xpp_usb: [ OK ]
opvxg4xx: [ OK ]
Running dahdi_cfg: DAHDI_SPANCONFIG failed on span 5: Invalid argument (22)
[FAILED]
== Parsing '/etc/asterisk/chan_extra.conf': == Found
== Parsing '/etc/asterisk/extra-channels.conf': == Found
== Parsing '/etc/asterisk/users.conf': == Found
[Jul 8 16:11:55] WARNING[4445]: chan_extra.c:1246 extra_open: Unable to specify channel 5: No such device or address
[Jul 8 16:11:55] ERROR[4445]: chan_extra.c:7741 mkintf: Unable to open channel 5: No such device or address
here = 0, tmp->channel = 5, channel = 5
[Jul 8 16:11:55] ERROR[4445]: chan_extra.c:11099 build_channels: Unable to register channel '5'
Unable to load module chan_extra.so
Command 'module load chan_extra.so' failed.