keywords: ip pbx voip gateway gsm gateway

× Questions about V100 Transcoding Series

Openvox V100 and asterisk 1.8 problem

8 years 2 months ago #8393 by Byako
I was doing as described here http://wiki.openvox.cn/index.php/OpenVox_V100_DAHDI_en
after install there is an error loading module
*CLI> module load codec_openvox.so
  == Parsing '/etc/asterisk/openvox_codec.conf':   == Found
[Oct 31 13:23:11] NOTICE[21448]: codec_openvox.c:1456 update_codec_list: found translator all
Openvox transcoding interface eth2 using IP address 10.1.1.100, netmask 255.255.255.0, silence suppression = no
Port 1 is reachable.
+-- MODULE VERSION INFORMATION -----------------------------------------------
| FirmwareVersion    : Vocallo 01.04.06-B9-PR
| MainApiVersion     : Main API 1.4.6.9
| CppApiVersion      : Cpp API 1.4.6.9
| VspMpVocApiVersion : VspMp Voice API 1.4.6.9
| VspMpVidApiVersion : VspMp Video API 1.4.6.9
| NetApiVersion      : Net API 1.4.6.9

+-- OCT1010 INFORMATION ------------------------------------------------------
| OCT1010Version       : OCT1010 3.0
| SerialNumber         : 17595
| ProjectNumber        : 22202
| OCT1010MacAddress[0] : 00-0c-90-1b-a7-b3
| OCT1010MacAddress[1] : 00-0c-90-1b-a7-b4
| OCT1010MacAddress[2] : 00-00-00-00-00-00
| OCT1010MacAddress[3] : 00-00-00-00-00-00
| OCT1010MacAddress[4] : 00-00-00-00-00-00
| OCT1010MacAddress[5] : 00-00-00-00-00-00
| OCT1010MacAddress[6] : 00-00-00-00-00-00
| OCT1010MacAddress[7] : 00-00-00-00-00-00
| OCT1010IDVersion     : OCT1010ID 4.4
| TdmNumStream         : 4
| TdmStreamFrequency   : 2
| MacAddress[0]        : a0-98-05-02-80-42
| MacAddress[1]        : a0-98-05-02-80-43
| UserInfo :
"

"


[Oct 31 13:23:13] ERROR[21448]: codec_openvox.c:1682 openvox_logger: Error: cOCTVC1_NET_MSG_ETH_LINK_OPEN_CID failed (Ethernet 1), rc = 0x0a000301

Unable to load module codec_openvox.so
[Oct 31 13:23:13] ERROR[21448]: codec_openvox.c:1682 openvox_logger: (cOCTVC1_GENERIC_RC_API_INVALID_CMD_LENGTH)


Command 'module load codec_openvox.so ' failed.
*CLI> [Oct 31 13:23:13] ERROR[21448]: codec_openvox.c:1682 openvox_logger: OpenEthernetLinks return error!

[Oct 31 13:23:13] ERROR[21448]: codec_openvox.c:1927 load_module: Failed to activate openvox transcoding library
I was searching through the internet but haven't found such errors and problems.
Is it possible to solve this problem?
8 years 2 months ago #8394 by chunlei.yi
hi,

please use the following v100 installation package to try, everything will be ok.
downloads.openvox.cn/pub/drivers/transco...nux_x86-1.1.0.tar.gz
if you still have problem, please contact me freely

msn: This email address is being protected from spambots. You need JavaScript enabled to view it.
skype: chunlei.yi
8 years 2 months ago #8395 by Byako
Yeah, it works great. Thank you!
I wonder if it is possible to install future releases of this transcoding software.
8 years 2 months ago #8396 by chunlei.yi
hi,
yes,you can install the future release of this transcoding software,but you need upgrade your dsp version,more details you can contact me via the IM tools
8 years 2 months ago #8400 by Byako
I sent you my skype via PM. I hope you could answer on some my questions. Thanks!
Time to create page: 0.038 seconds
Powered by Kunena Forum