Caller ID problem

Thanks for your reply
I have found the source of package on elastix official site that via this URL .
But for recompile which packages do I have to download? because in previous reply you did not mention about this.
I think many of elastix users may expose to this problem so It's better that there be a complete tutorial about this problem.

Hi
Is there any help or instruction?

Thanks

Hi

Can A400P detect MDMF caller ID? If yes, How to config,
I try cidstart=ring or polarity, and cdisignalling=dtmf or bell. It can't detect callerid.
I also record audio files by the way "dahdi_monitor 1 -v -r streamrx.raw -t streamtx.raw". and analyse the two tone files. They can't be detected any dtmf caller id, but can detected MDMF callerid correctly.
thanks.

Hello,
You have to confirm what type of caller ID signalling you should use(ask your service support to confirm).
Here are the alternatives:Different country might be different.

---

Type of caller ID signalling in use
; bell = bell202 as used in US (default)
; v23 = v23 as used in the UK
; v23_jp = v23 as used in Japan
; dtmf = DTMF as used in Denmark, Sweden and Netherlands
; smdi = Use SMDI for caller ID. Requires SMDI to be enabled (usesmdi).

---

Select the one which matches you want.
What does MDMF means?

Regards!

Hi,

Our telecom company use FSK and MDMF(Multiple Data Message Format) data format to send caller ID.

I try all signalling above. but still can not detect caller ID

Thanks for your help

in this case, you should try all kinds of fsk cid param, and could you ask the telephone company does the cid have any start signal? such as polairty or ring or nothing?