A1200P Wont dial!

hello!!

i have serious troubles with two A1200P card, the trouble its that sometimes my asterisk doenst up the ZAP Channel i mean the box can make calls but sometimes (twice today) asterisk gets stuck inthe call and we cant dial out via pstn so i needed to perform an asterisk stop, then a zaptel restart, and then i started asterisk and "magically" its working now but i have this trouble some times and my friend who ae helping me to check it doesnt found anything everything its "apparently" fine,

mi box is:

centos 4.6
asterisk 1.2.18
zaptel 1.2.23
kernel - 2.6.16.18 (compiled by myself)

any idea?


Regards

hello, could you check the IRQ? if possible, please post the /var/log/messages log .
Regards,
James.zhu

hi Zhu here is my messages log and some screenshots of zttool, zap show channels and zap show status

Feb 5 17:26:15 bpaasesores zaptel: Loading zaptel framework: succeeded
Feb 5 17:26:18 bpaasesores kernel: Registered tone zone 27 (Mexico)
Feb 5 17:26:18 bpaasesores zaptel: Running ztcfg: succeeded
Feb 5 17:26:42 bpaasesores kernel: Freed a OpenVox A1200 card
Feb 5 17:26:42 bpaasesores kernel: Freed a OpenVox A1200 card
Feb 5 17:26:42 bpaasesores kernel: Zapata Telephony Interface Unloaded
Feb 5 17:26:43 bpaasesores kernel: Zapata Telephony Interface Registered on major 196
Feb 5 17:26:43 bpaasesores kernel: Zaptel Version: 1.2.23
Feb 5 17:26:43 bpaasesores kernel: Zaptel Echo Canceller: KB1
Feb 5 17:26:43 bpaasesores zaptel: Loading zaptel framework: succeeded
Feb 5 17:26:49 bpaasesores kernel: ACPI: PCI Interrupt 0000:04:04.0[A] -> GSI 17 (level, low) -> IRQ 217
Feb 5 17:26:49 bpaasesores kernel: OpenVox A1200P version: 1.2
Feb 5 17:26:49 bpaasesores kernel: OpenVox A1200P passed register test
Feb 5 17:26:49 bpaasesores kernel: Module 0: Installed -- AUTO FXO (FCC mode)
Feb 5 17:26:50 bpaasesores kernel: Module 1: Installed -- AUTO FXO (FCC mode)
Feb 5 17:26:50 bpaasesores kernel: Module 2: Installed -- AUTO FXO (FCC mode)
Feb 5 17:26:50 bpaasesores kernel: Module 3: Installed -- AUTO FXO (FCC mode)
Feb 5 17:26:50 bpaasesores kernel: Module 4: Installed -- AUTO FXO (FCC mode)
Feb 5 17:26:50 bpaasesores kernel: Module 5: Installed -- AUTO FXO (FCC mode)
Feb 5 17:26:51 bpaasesores kernel: Module 6: Installed -- AUTO FXO (FCC mode)
Feb 5 17:26:51 bpaasesores kernel: Module 7: Installed -- AUTO FXO (FCC mode)
Feb 5 17:26:51 bpaasesores kernel: Module 8: Installed -- AUTO FXO (FCC mode)
Feb 5 17:26:51 bpaasesores kernel: Module 9: Installed -- AUTO FXO (FCC mode)
Feb 5 17:26:51 bpaasesores kernel: Module 10: Installed -- AUTO FXO (FCC mode)
Feb 5 17:26:52 bpaasesores kernel: Module 11: Installed -- AUTO FXO (FCC mode)
Feb 5 17:26:52 bpaasesores kernel: Found a OpenVox A1200P: Version 1.2 (12 modules)
Feb 5 17:26:52 bpaasesores kernel: ACPI: PCI Interrupt 0000:04:05.0[A] -> GSI 18 (level, low) -> IRQ 225
Feb 5 17:26:52 bpaasesores kernel: buffer re-sync occur from 0 to 1
Feb 5 17:26:52 bpaasesores kernel: OpenVox A1200P version: 1.2
Feb 5 17:26:52 bpaasesores kernel: OpenVox A1200P passed register test
Feb 5 17:26:52 bpaasesores kernel: Module 0: Installed -- AUTO FXO (FCC mode)
Feb 5 17:26:53 bpaasesores kernel: Module 1: Installed -- AUTO FXO (FCC mode)
Feb 5 17:26:53 bpaasesores kernel: Module 2: Installed -- AUTO FXO (FCC mode)
Feb 5 17:26:53 bpaasesores kernel: Module 3: Installed -- AUTO FXO (FCC mode)
Feb 5 17:26:53 bpaasesores kernel: Module 4: Installed -- AUTO FXO (FCC mode)
Feb 5 17:26:53 bpaasesores kernel: Module 5: Installed -- AUTO FXO (FCC mode)
Feb 5 17:26:54 bpaasesores kernel: Module 6: Installed -- AUTO FXO (FCC mode)
Feb 5 17:26:54 bpaasesores kernel: Module 7: Installed -- AUTO FXO (FCC mode)
Feb 5 17:26:54 bpaasesores kernel: Module 8: Installed -- AUTO FXO (FCC mode)
Feb 5 17:26:54 bpaasesores kernel: Module 9: Installed -- AUTO FXO (FCC mode)
Feb 5 17:26:54 bpaasesores kernel: Module 10: Installed -- AUTO FXO (FCC mode)
Feb 5 17:26:54 bpaasesores kernel: Module 11: Installed -- AUTO FXO (FCC mode)
Feb 5 17:26:54 bpaasesores kernel: Found a OpenVox A1200P: Version 1.2 (12 modules)
Feb 5 17:26:54 bpaasesores kernel: buffer re-sync occur from 0 to 3
Feb 5 17:26:54 bpaasesores kernel: Registered tone zone 27 (Mexico)
Feb 5 17:26:57 bpaasesores kernel: Registered tone zone 27 (Mexico)
Feb 5 17:26:57 bpaasesores zaptel: Running ztcfg: succeeded
Feb 5 17:40:07 bpaasesores sshd: Interrupción de sshd succeeded
Feb 5 17:40:07 bpaasesores sshd: succeeded
Feb 5 17:40:19 bpaasesores sshd(pam_unix)[19943]: session opened for user root by (uid=0)
Feb 5 17:40:23 bpaasesores sshd(pam_unix)[18636]: session closed for user root
Feb 5 18:12:36 bpaasesores sshd(pam_unix)[20398]: session opened for user root by (uid=0)
Feb 5 18:45:49 bpaasesores yum: Updated: kernel-hugemem-devel.i686 2.6.9-67.0.4.EL
Feb 5 18:45:50 bpaasesores kernel: loop: loaded (max 8 devices)
Feb 5 18:46:09 bpaasesores kernel: CSLIP: code copyright 1989 Regents of the University of California
Feb 5 18:46:09 bpaasesores kernel: ISDN subsystem Rev: 1.1.2.3/1.1.2.3/1.1.2.2/1.1.2.3/1.1.2.2/1.1.2.2 loaded
Feb 5 18:46:10 bpaasesores kernel: HiSax: Linux Driver for passive ISDN cards
Feb 5 18:46:10 bpaasesores kernel: HiSax: Version 3.5 (module)
Feb 5 18:46:10 bpaasesores kernel: HiSax: Layer1 Revision 2.46.2.5
Feb 5 18:46:10 bpaasesores kernel: HiSax: Layer2 Revision 2.30.2.4
Feb 5 18:46:10 bpaasesores kernel: HiSax: TeiMgr Revision 2.20.2.3
Feb 5 18:46:10 bpaasesores kernel: HiSax: Layer3 Revision 2.22.2.3
Feb 5 18:46:10 bpaasesores kernel: HiSax: LinkLayer Revision 2.59.2.4
Feb 5 18:46:10 bpaasesores kernel: HiSax module removed
Feb 5 18:46:10 bpaasesores kernel: ISDN-subsystem unloaded
Feb 5 18:46:11 bpaasesores yum: Installed: kernel-smp.i686 2.6.9-67.0.4.EL
Feb 5 18:46:52 bpaasesores yum: Installed: kernel-devel.i686 2.6.9-67.0.4.EL
Feb 5 18:47:12 bpaasesores kernel: CSLIP: code copyright 1989 Regents of the University of California
Feb 5 18:47:12 bpaasesores kernel: ISDN subsystem Rev: 1.1.2.3/1.1.2.3/1.1.2.2/1.1.2.3/1.1.2.2
Feb 5 18:47:12 bpaasesores kernel: HiSax: Linux Driver for passive ISDN cards
Feb 5 18:47:12 bpaasesores kernel: HiSax: Version 3.5 (module)
Feb 5 18:47:12 bpaasesores kernel: HiSax: Layer1 Revision 2.46.2.5
Feb 5 18:47:12 bpaasesores kernel: HiSax: Layer2 Revision 2.30.2.4
Feb 5 18:47:12 bpaasesores kernel: HiSax: TeiMgr Revision 2.20.2.3
Feb 5 18:47:12 bpaasesores kernel: HiSax: Layer3 Revision 2.22.2.3
Feb 5 18:47:12 bpaasesores kernel: HiSax: LinkLayer Revision 2.59.2.4
Feb 5 18:47:12 bpaasesores kernel: HiSax module removed
Feb 5 18:47:12 bpaasesores kernel: ISDN-subsystem unloaded
Feb 5 18:47:13 bpaasesores yum: Installed: kernel.i686 2.6.9-67.0.4.EL
Feb 5 18:47:56 bpaasesores yum: Updated: kernel-smp-devel.i686 2.6.9-67.0.4.EL
Feb 5 19:07:58 bpaasesores sshd(pam_unix)[19943]: session closed for user root
Feb 5 19:08:02 bpaasesores sshd(pam_unix)[20398]: session closed for user root
Feb 5 19:12:53 bpaasesores sshd(pam_unix)[2574]: session opened for user root by (uid=0)
Feb 5 19:32:23 bpaasesores sshd(pam_unix)[2574]: session closed for user root
Feb 5 20:04:06 bpaasesores sshd(pam_unix)[2784]: session opened for user root by (uid=0)


bpaasesores*CLI> zap show channels
Chan Extension Context Language MusicOnHold
pseudo from-pstn en
1 from-pstn en
2 from-pstn en
3 from-pstn en
4 from-pstn en
5 from-pstn en
6 from-pstn en
7 from-pstn en
8 from-pstn en
9 from-pstn en
10 from-pstn en
11 from-pstn en
12 from-pstn en
13 from-pstn en
14 from-pstn en
15 from-pstn en
16 from-pstn en
17 from-pstn en
18 from-pstn en
19 from-pstn en
20 from-pstn en
21 from-pstn en
22 from-pstn en
23 from-pstn en
24 from-pstn en

bpaasesores*CLI> zap show channels
Chan Extension Context Language MusicOnHold
pseudo from-pstn en
1 from-pstn en
2 from-pstn en
3 from-pstn en
4 from-pstn en
5 from-pstn en
6 from-pstn en
7 from-pstn en
8 from-pstn en
9 from-pstn en
10 from-pstn en
11 from-pstn en
12 from-pstn en
13 from-pstn en
14 from-pstn en
15 from-pstn en
16 from-pstn en
17 from-pstn en
18 from-pstn en
19 from-pstn en
20 from-pstn en
21 from-pstn en
22 from-pstn en
23 from-pstn en
24 from-pstn en

hello, could you check the IRQ for A1200P? please cat /proc/interrupts? thw A1200P cards should have own IRQs.
Regards,
James.zhu

sure


[root@bpaasesores ~]# cat /proc/interrupts
CPU0
0: 1967761 IO-APIC-edge timer
8: 1 IO-APIC-edge rtc
9: 0 IO-APIC-level acpi
14: 51842 IO-APIC-edge ide0
185: 0 IO-APIC-level ehci_hcd, uhci_hcd
193: 0 IO-APIC-level uhci_hcd
201: 0 IO-APIC-level uhci_hcd
209: 8971 IO-APIC-level uhci_hcd, eth0
225: 1376529 IO-APIC-level opvxa1200
233: 1362736 IO-APIC-level opvxa1200
NMI: 0
LOC: 1952968
ERR: 0
MIS: 0

hello, rfernandez_mx:
the result posted above is under down-status or normal running status? please check and cat the IRQs when the system does not make calls.
Regards,
James.zhu