keywords: ip pbx voip gateway gsm gateway

×

Notice

The forum is in read only mode.
× Questions about A400/800/1200 Analog Interface Card

large background noise

15 years 11 months ago #1124 by rilawich
Hi all,
I have a A800P with all FXO on it. It works without problem in the phone operation. However, I always hear very large background noise when I talking to the called party. I donno whether it is setting problem. Anyone can tell me how to eliminate the background noise?
ango
15 years 11 months ago #1125 by james.zhu
hello,
please check your loadzone for your country and adjust rxgain and txgain.
Regards!
James.zhu

15 years 11 months ago #1126 by rilawich
hi,
I am using it in HK. I donno whether the following setting is correct. Please advise.
Below is my configuration.
/etc/zaptel.conf
loadzone = us
defaultzone = us
The value below that I have tuned several time. But the background noise still exists.
zapata.conf
rxgain=10.0
txgain=6.0
15 years 11 months ago #1127 by james.zhu
hi,
please change us to uk and load the card with opermode="uk" open the echocancellation=yes. please try!
James.zhu

15 years 11 months ago #1130 by miaolin
Also please send your ssh root account to This email address is being protected from spambots. You need JavaScript enabled to view it.
15 years 10 months ago #1339 by rilawich
[quote:e562c77e91="james.zhu"]hi,
please change us to uk and load the card with opermode="uk" open the echocancellation=yes. please try!
James.zhu[/quote]

Actually, following is the problem we got.
A (IP phone) --> PC (2 A800P) --> PSTN --> B
-A can hear her own background noise in the earphone.
-Volume of A is very low when B hear A.
-A hears B is ok.

Do you mean set the setting in the following files can solve the problems?
/etc/zaptel.conf
loadzone=uk
defaultzone=uk

indications.conf
country=uk

zapata.conf
echocancel=yes

Where to set the opermode?
Time to create page: 0.038 seconds
Powered by Kunena Forum