Problem when I restart my box

I have 2 Openvox card in my server, one 4 E1 and one 4 FXO, when I restart the server in 90% of the time the zaptel service give me a error and I need to detect my card a reconfigurate againg.

I use Elastix 1.3.2.

I have the same proble in many diferent server such as DELL, Clone (Intel Petium IV, Intel Core 2 Duo, etc).

What is my problem?

Please help me?

With Sangoma card I don´t have this problem.

Thanks,

Rodrigo Cuadra
Telesoft

hello,
what is the error? try to load fxo first and then 4e1 driver.
regards!
James.zhu

The error is in boot:

ZT_SPANCONFIG failed on span 1: Invalid argumen

hello,
what is your FXO card, is it a800p/a1200p or a400p? can you show lspci -vvvvvvvvv. i think the error caused by hardware detection.
regards!
James.zhu

The hardware is:

A400P for 4 FXO
D410P for 4 E1 ISDN card

I change the card position and the error continue.

Sure, is hardware detection in boot.

But How can I do to fix this problem.

Also I have other server with a800p and D210E and the problem is the same.

0d:03.0 Network controller: Tiger Jet Network Inc. Tiger3XX Modem/ISDN interface
Subsystem: Unknown device b100:0001
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr+ DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (250ns min, 32000ns max)
Interrupt: pin A routed to IRQ 82
Region 0: I/O ports at dc00
Region 1: Memory at fc6ff000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI+ D1- D2+ AuxCurrent=55mA PME(D0+,D1-,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-

0e:04.0 Communication controller: Digium, Inc. Wildcard TE410P quad-span T1/E1/J1 card 3.3V (rev 02)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32
Interrupt: pin A routed to IRQ 90
Region 0: Memory at fc4ffc00 (32-bit, non-prefetchable)