hello:
please check:
span=1,0,0,ccs,hdb3 ; it should be 1.1.0.ccs,hdb3 not 1.0.0
bchan=1-15,17-31
dchan=16
echocanceller=mg2,1-15,17-31
if it is a error like this:
chan_dahdi.c:11722 pri_dchannel: PRI Error on span 0: We think we're the network, but they think they're the network, too.
set signalling=pri_cpe,are you sure you are using pri_cpe?
by the way, the card is exactly same with digium cards, the cabling should be same. please add my my gmail and give me ssh. my google talk:[email protected]
regards!
james.zhu
I have tried the various settings and especially checked the pri_cpe setting and still am getting the same error. James - I sent you a PM with login information and I will keep google messenger up.
I have the telco pay a visit today and learned that they installed a BRI, not a PRI. :@ :'( I have a battle ahead of me. James - I'll let you know when the line is installed.